User Manual

130
SPECTRALIS 2
2/3:Trigger-Group Filter, Noise
MM:TG1 LP:TG1 NSE:TG1 FB:TG1
„MM“ - (Multimode Filter) selects the triggergroup for the multimode
filter.
„LP“ - (24 dB lowpass filter) selects the triggergroup for the 24dB
lowpass filter.
„NSE“ - (Noise) selects the triggergroup for the noise source.
„FB“ - (Fixed Filterbank) selects the triggergroup for the fixed filterbank.
3/3:Trigger-Group Note-Priority
TG1:HIGH TG2:HIGH TG3:HIGH
„TG1“ - „TG3“ - (Triggergroup x note priority mode) select how the
hybrid synth handles mutliple notes. Possible options are:
„HIGH“ - (highest note priority) the highest note of multiple notes has
priority. Notes below the highest note will be ignored.
„HI-TR“ - (highest note priority with retrigger) a new highest note
retriggers the envelopes even when the former highest note is still held
down.
„LOW“ - (lowest note priority) the lowest note of multiple notes has
priority. Notes above the lowest note will be ignored.
„LO-TR“ - (lowest note priority with retrigger) a new lowest note
retriggers the envelopes even when the former lowest note is still held
down.
„LAST“ - (last note priority) - the last played note has always priority
independent from the pitch.
„LS-TR“ - (last note priority with retrigger) A new note always retriggers
all envelopes of that triggergroup - even if the former note is still held
down.
TIP! Subpart Selection. After assigning VCOs and filters to different
triggergroups, the resulting subparts can be selected in the part select
menu by holding down the num button 12. The following subpart selection
page opens:
1/4:S01:Bass2Ass PA08:DSP Bass Pa:12
[Part12] [Part13] [Part14] [current]
Hybrid Synthesizer reference: Triggergroups