User Manual

132
SPECTRALIS 2
notes of the Hybrid synthesizer, these controls passes signal through the engine
even if no envelope generator gets triggerd.
By holding down the [SHIFT] button while turning the EG BALANCE encoder,
all volume envelopes will get macro controlled. Turning to the left shortens the
sound and turning to the right adds more attack time.
Pushing the EG BALANCE encoder encoder opens the edit menu for all volume
envelopes.
1/8:VCO1 Volume Envelope Generator Page1
Att:3 ^Dec:91 Stn:255 Rls:104
„Att“ - (Attack Time) controls the attack time of the module volume
envelope.
„Dcy“ - (Decay Time) controls the decay time of the module volume
envelope.
„Stn“ - (Sustain Level) controls the sustain level of the module volume
envelope.
„Rls“ - (Release Time) controls the release time of the module volume
envelope.
The first page starts with the volume envelope of oscillator 1. The other
envelopes can be reached with the page buttons.
Page 2 - 8 are showing the envelopes for VCO 2 - 4, the noise source, the
multimode filter, the 24dB Lowpass filter and the fixed filterbank.
Pressing any of the „Dec“ (Decay Time) display encoders opens a second edit
page for each envelope:
1/8:VCO1 Volume Envelope Generator Page2
Hld:0 Byp:255
„Hld“ - (Hold Time) controls the hold time between the attack and decay
phase of the envelope.
„Byp“ - (Envelope controlled amplifier bypass) controls the direct output
signal of the selected sound source.
By pressing the EG-RELEASE button one reaches the bypass envelope menu
for all elements of the Spectralis that have this opportunity - the oscillators, the
filters and the noise source.
1/2:Bypass Settings
Osc1:0 Osc2:0 Osc3:0 Osc4:0
Hybrid Synthesizer reference: VCA section