User Manual

137
SPECTRALIS 2
used you will see
a soundname. You can recognize unused slots by the display message "--
-". After
selecting the storage slot push the fourth encoder, which will prompt the
menu for input of the sound-name:
Enter Sound-Name
[............] <DEL> abc
In this menu you can input titles directly using the two lower rows of buttons.
Each new letter will shift the write cursor by one position to the right. If you've
made a mistake, you can erase the mistake using the control [<DEL>]. By
turning the [<DEL>] encoder button you can move forward and backward in
the name you are working on. Using the encoder button [abc] lets you determine
upper and lower case letters. The button has an automatic toggle function between
three options. "abc" automatically uses smaller case letters, "Abc" will always
capitalize the first letter of a new word and "ABC" will input all letters in upper
case.
Once you have entered the Name you can confirm saving the sounds by once
more pushign the [Save]-button or using the [ENTER]-button. The Spectralis
will then automatically leave the "naming" dialog. It will revert to a spot two
menulevels above for the start of the next sound storage. Of course you can also
leave the save menu by pushing [EXIT].
5.1.2 Creating a new soundbank
If you wish to create a new soundbank proceed exactly as before. Use the
[SAVE]-button to prompt the Save-Menu:
What do you want to save?
[sound] [pattern] [song] <creativ>
Use the [Sound]-encoder button to prompt the Sound-Save-Menu:
Save Sound Menue
(1-15) [current] [EXIT]
Select now either [current] or (1-15) and the corresponding numeric button of
the parts,
for which you want to create a soundbank. This will take you to the storage-slot
select function. you should see the following display message:
Select Memory Location and press SAVE:
C:A-Synth S:? F:[SNDBANK]
Push the third encoder [SNDBANK]. This will prompt the menu for creation of
a new soundbank:
Creating a new soundbank