User Manual

148
SPECTRALIS 2
1_5Set.SFI
2005-10-06 08:16 858154496
5.) By hitting the [Enter]-button the restore function will start automaticly
with the formatting procedure. When the restore function is done, please reboot
the Spectralis.
8.3 Switching the Sample-Set file-type from "fix" to "dynamic" loading
At the Spectralis 2 panel press and hold the [Shift]-button and press
[Browse]. The file browser dialog will appear in the display:
Select Device for Browsing:
[Flash] [ClrSnd] [SD-Card]
Press the encoder-button next to the memory location "Flash" when you want
to edit the sample-set loading mechanism. After pressing the encoder-button
under the "Flash" entry, the display will show up the first file on that medium
together with the creation date and the memory usage of this file:
Analogie.SSB:
2005-09-24 18.57 63584
The file Analogie has been changed for the last time at the 24th of september
2005 at 6.57pm and contains 63584 bytes. With the [Page-Up]-button, you
can browse thru the file list. As soon as you reach a *.slc or *.sli-file, you will
notice additional information in the display:
CR78SSSPEC.SLC(FIX, loaded):
2005-05-27 15.27 298880
By hitting the [Enter]-button you can now toggle between "Fix" and "Dynamic"
loading. Leave the menu with the [Exit]-button.
TIP: You can switch samplesets from dynamic to fix loading by changing
the archive bit of the files in your yomputer. If the archive bit is cleared,
the sampleset is set to dynamic loading. You can change an entire sampleset
by selecting multiple files and clearing the archive bit on multiple files at
once. That is much quicker than using the browse function of the
Spectralis.
Switching patterns from fix to dynamic loading