User Manual

17
SPECTRALIS 2
Whichever function you use last in this Section, determines the assignment of
the numeric Buttons. It’s all quite simple – once you know!
TIP: Changing numeric Button assignments temporarily:
When you are pushing the ”Part-Section” Button, the corresponding
function kicks in and the assignment is permanent. Holding the ”Part-
Section” Button down however and pushing a numeric Button at the same
time, activates the function only temporarily. Once you release the button
you’ll return to the previously selected Menu.
2.5.2 „Num-Button-Assignment“-section
(upper left above the encoders 1-16)
This is the section where you can determine the assignment of the numeric
buttons [1]-[16]. Any function activated in the part section can be turned off
with these buttons. Only one of the "Num Button Assignment"-buttons can be
active at a time.
[Song]
By using the [Song]-button you can select one of the 16 current songs
via the numeric buttons [1]-[16].
[Pattern]
When using the [Pattern]-button, you can select patterns of the current
songs by using the numeric buttons [1]-[16] in combination with [Shift]
+ [1]-[16]. The patterns you’ve selected, will start playing instantly once
you push the numeric buttons. There is no need to push the [Play]-button
in the transport field.
You will find a separate chapter ”How to..." Jamming with patterns starting
on page 25.
[Drum-Groove]
Using the [Drum-Groove]-button you can simultaneously change the
motifs 1-11 of the patterns in order hear a selected pattern with a diffe-
rent drum-rhythm, by pushing the numeric buttons [1]-[16] or rather
[Shift] + [1]-[16].
[Quicksound]
The quicksound button gives access to a special soundbank with your
favorite sounds for drums, DSP synth and analog synth parts. This bank
holds 32 Hybridsynth sounds, 32 DSP synth sounds and additional 16
sounds for each drumpart. Patches 17 - 32 can be recalled by holding
down shift and pressing numberbuttons 1-16. Press and hold [SAVE]
and touch the desired memory location on the num buttons to save a
patch into the quicksound bank.
Overview: Num-Button-Assignment