User Manual

SPECTRALIS 2

1/9:24dB Lowpass:Cutoff Modulation LFO

FMWve:0 FmRte:0 FMDpt:0

In the upper row you will see the current information such as song-number

(S01), current song-name (Song01), the name of the selected pattern and the

selected song-tempo in BPM (beats per minute).

The lower row shows parameters, which can be changed with the encoders located

below the display. The significance of the various parameters is explained in the

respective chapters in this manual.

The type of entry will indicate the functionality of the encoders at the time:

For all display-entries where the description is followed by a colon and a parameter

value or a selection option turning the encoder will either prompt a selection list or

change of parameters.

FMWve:0 FmRte:0 FMDpt:0

For all entries which are shown in square parenthesis [ ] the encoder only has a

push-button function:

C:Funky | [NO] [YES]

There are additional encoder functions in the menus for editing of sounds. Just

push the encoder button (OSCWAVE) in the oscillator-section right after turning

on the Spectralis. You will see the following display-message:

01/26:VCO Shape

^Osc1:100 ^Osc2:100 ^Osc3:100 ^Osc4:100

Here as well you will see a parameter description followed by a parameter-value,

however there is also an additional up-arrow right before the description. In this case

you can turn the encoder to change a parameter-value – the arrow however indicates,

that the encoder has also a button function – usually to call up a submenu connected

to this parameter.

Overview: Display-section