User Manual

27
SPECTRALIS 2
S01:<Song 01> Pattern:<Patt01> Tempo:120
C:Kick S:TR-Alike 808Deep <Vol>
C:Kick
Using the first Encoder you can now select the sound-category.
If you want to stick with the Category ”Kick” the Spectralis will offer
you a selection of sounds (in this case ONLY Kicks), which are part of
this category. By setting the category to "ALL" you can select all drum
sounds stored in the machine.
S:TR-Alike
Using the second Encoder you can select another subcategory.
Subcategories allow to make a kind of preselection for your sound search.
If you for example are looking for TR-909 kicks, select TR-Alike and
the Spectralis will list all sounds, taken from the TR-family of
drumcomputers.
808Deep
The third encoder selects the sound itself. The sound you are selecting
will will not be loaded until you push down the encoder button. That is
necessary for all sample-based sounds to avoid unnecessary sample
loading during your sound search. But you can overcome this by simply
hitting the [page-up] and [page-down] buttons for selecting and activating
a samplebased sound. That often also works faster than the rotary encoder
function. By selecting subcategory "All" in advance, you can switch
through the entire range of kick drums available on your machine.
<Vol>
Using the fourth encoder you can determine the Volume of the new sound.
Currently (version 097L) this encoder has no function. But you can adjust
the volume in the volume mixer by hitting [Volume] in the mixing desk
section and dialing the encoder of the desired part.
3.1.7a The pattern transpose function"How to...?"
The Pattern transpose function is enabled in pattern jam mode as well. Just
play a pattern, hit and hold the [SHIFT]-button and hit the [PLAY] button in
the part section. Now the pattern get gat transposed by pressing the num buttons
1 - 13. 14 and 16 switch the whole transpose range one octave up or down.
"Pattern-Jam"-mode