User Manual

SPECTRALIS 2

3.1.8 Saving patterns

Now that you have made some changes to the patterns, you’re probably curious

how you can actually save your changes – especially since the Spectralis will

remind you to do so after changes during each pattern-change. As soon as you

have made a change, the [Save]-button will start to blink. If you are pushing

the [Save]-button you will see the following display-menu:

What do you want to save?

<Sound> [Pattern] <Song> <Creativ>

Use the encoder-button below the entry [Pattern]. This should prompt the

following display message:

Select Memory Location and press „SAVE“

<extern> [Song] [Current] [Exit]

As you can see, you will have three options available. The option <Extern> is

not available yet but will be part of a future firmware revision.

[Song]

Once you select [Song] using your soft button, you will be able to save

the current pattern to multiple memory locations at the same time. This

option also provides the possibility to save the changed pattern to a dif-

ferent slot than the one containing the original pattern. Confirm by pushing

[Song] and you should see the following display-message:

Choose Pattern-Number(s) and „Save“

Have a look at the numeric buttons. Memory locations already in use

will be lit. Select the numeric button 1-16 with which you would like to

be able to select your new patterns at a later stage. Please keep in mind

that each song can have up to 32 patterns. You can reach the second bank

of 16 patterns, by using the [Shift]-button during selection. Flashing

numeric buttons will indicate your memory slot selection. You can also

remove a selected memory slot by pushing the flashing button once more.

Once you’re done with your selection, confirm the save procedure by

pushing the [Save]-button once more.

[Current]

[Current] just updates the current pattern memory with the changes,

you have programmed. This is a very useful function if all you want to

do is to make your changes permanent for the currently selected pattern.

You will automatically leave the "Pattern-Save"-menu thereafter.

[Exit]

Exits the ”Pattern-Save”-menu without saving any changes!

Saving patterns