User Manual

SPECTRALIS 2

that makes a synth sounding phatt. However, at real synthesizers the oscillators

are freerunning. Every note, you are playing opens the VCA at another position

of this oscillator phase shift beating. The sample oscillators of the Spectralis

can simulate that by shifting the sample-start point resulting in a sample based

sound with liveness. Additionally you can add rhichness by trigger up to 8

DSP voices simultaneously with detuning.

Please push the [MACRO-CONTROL]-encoder button inside the VCO-

section to open the Oscillator sample playback mode menu:

1/2 Oscillator Sample playback mode

Start:0 StartM:0 Mode:Poly Detn:0

Start - Sample Startpoint

Start lets you truncate the sample startpoint.

StartM - Sample Startpoint Modulation

This encoder sets the speed of the sample startpoint Modulation. A setting

of "0" disables the Sample-Startpoint Modulation.

Mode - Playmode Selection

Offers different sample playback modes:

Poly: Standard polyphonic playmode.

Mono: Monophonic Playmode

Uni2-8: Unisono 2, 4 and 8 are the different unisono playback modes

that can create very rhich sounds and flanging FX depending on the

settings. Unisono modes are using multiple sample voices per note. Uni-

sono 8 will need 8 voices per tone. The maximum polyphony for such a

sound is limited to 4.

Detn - Detune parameter for unisono voices

The detune parameter sets the amount of detune for the unisono voices.

Settings around 1-3 are resulting in deep flanging effects - especially on

using Unsisono 8 mode.

3.2.5 Reverse sample playback

At the second page of the oscillator sample playback menu one can activate a

reversed sample playback mode for oneshot samples like drumsounds or FXs.

Press the [page-up]-button to open the following menupage:

2/2 Oscillator Sample Playback mode

VDir:Norm

Simply set "VDir" to "REVERSE" to activate the reversed playback algorithm.

Editing DSP- synthesizer sounds - sample oscillator