User Manual

SPECTRALIS 2

This Display message is repeated in a number of sections of the Spectralis in

slighty modified form:

Waveform-Modulation

1.) Push the [Osc Wave] encoder button in the oscillator section.

2.) Depending on the desired oscillator push the [VCO-Shape] encoder button

under the display. You should see the following display message:

1/2: VCO1 Waveform Modifiers

^Shape:100 ^TLM:-1 ^Sync:0

3.) Push the [Shape] encoder button in this menu. You should see the following,

already familiar display message.

VCO1 Wavetable Modulation

Src1:None Dph:0 Src2:None Dph2:0

Time-Linearity-Modulation

1.) Push the [OSC Wave] encoder button in the oscillator section

2.} Depending on which oscillator is selected push the [Shape] encoder button

under the display. You should see the following display-message:

1/2: VCO1 Wave

^Shape:100 ^Pwm:-1 Sync:0

3.) Push the [PWM] encoder button in this menu. You should now see the

following, already somewhat familiar display message:

VCO1 Time Linearity Modulation (PWM)

Src1:None Dph:0 Src2:None Dph2:0

VCO pitch-modulation

1.) push the [OscDetune] encoder button. You should see the following menu:

1/4:VCO Fine Tune

^Osc1:0 ^Osc2:0 ^Osc3:0 ^Osc4:0

Now push the Oscillator finetune encoder buttonof your choice. The following

function is available for each of the Oscillators:

1/8:VCO1 Fine Tune Modulation

LWve:0 LRte:0 LDpt:0

2.) Pushing the [Page-Up] button twice will direct you to the Edit page of the

Modulator-Assignment:

2/8:VCO1 Pitch Modulation

Src1:None Dph:0 Src2:None Dph2:0

Hybrid engine - The LFO section