User Manual

SPECTRALIS 2

[0]

Displays the actual value of the shift in steps and additionally enables

you to return the sequence to the original position by pushing this button.

Please note, that after a pattern has been saved the shift of the sequencer

line will be memorized as the new original position. Using encoder

(Seq:L11) you can directly select another line for rotation. Not only to-

nal lines can be rotated but also other parameter lines.

3.6 Target selection

The sequencer lines of the Spectralis can play notes, affect parameters of the

Analog Synth and send MIDI data. In the “Target Selection” menu you can

determine which target you want the sequencer-line to control. The line resulting

from your selection will appear differently depending on the target. Note-lines

for each step contain settings for the note length, pitch, velocity and probability.

Pure parameter lines contain settings for the step envelope, its length and

intensity of the envelope-control. MIDI control tracks have no envelopes. Most

of the demo patterns in the Spectralis’ RAM already have preset step-sequencer

targets. These date back to the early design phase of the Spectralis when targets

still remained set. The Spectralis has a total of 32 sequencer-lines, which should

be sufficient even for complex automations. You can generate new sequencer-

lines in the sequencer functions menu. The controller for the sequencer-line

selection at the end of the list has an entry “Create”. If you push the line-

selection controller the Spectralis will create a new sequencer-line and will

directly display the menu for Target Selection for the sequencer-line. The menu

can also be accessed via the [Target]-button in the Sequencer-Edit section:

Line Section->Group->Parameter

Seq:L01 Filter Volume FBByp

Line:

Use the first rotary encoder to select the sequencer-line for which you

want to determine the target.

Section:

For better orientation the parameters have been set up in sections. The

following sections are available for the Target selection:

Filter-> Filterbank Parameter

AVCF-> Analog Synth analog filterparameters

AVCO-> Analog Synth oscillator parameter

AVCA-> Analog Synth VCA parameter

ALFO-> Analog Synth LFO parameter

DSYN-> DSP Engine Targets (notelines)

ASYN-> Triggergroup control (notelines)

MIDI-> Notes. Aftertouch or MIDI Controller

Device-> Parameter which affect all parts such as FXParameter (not

available yet)

Mixer-> Mixer parameter (not available yet)

Step-sequencer advanced - Target selection