User Manual

SPECTRALIS 2

You will see the following display message:

Load Motif into Pattern Freaky with:

[origSND] [curSND] [NO] [YES]

This message appears as well, if you select a motif with the numbuttons. Inde-

pendent from this menu you still can change the motif by using the numbottons.

In this display menu the encoder-buttons have the following functions:

[OrigSND] – Original Sound

Loads the motif with the corresponding sounds

[curSND] – Current Sound

Loads only the notes, however plays the motif with the sounds contained

in the pattern currently playing

[NO]

Ends the process. (Maybe the motif wasn’t all that good???!)

[YES] –

Loads the motif to the pattern.

Using the [Exit]-button you can leave the menu! You will find yourself

back in the Motif-Selection Menu.

3.9.2 The Motif Edit Menu

S01 PA01: Exchange Motif for Part Kick

S01:01 P:01 M:Kick [EDIT]

Up to now we have not discussed the [Edit]-command in the motif menu. By

pressing the [Edit]-encoder button, the edit menu will appear in the display.

This edit menu allows to change the way, a motif will be played within the

pattern:

1/2:Pat:BasicBass Line: Kick Motif-Edit

Len: 1 Loop:Cont

Len - Motif Length

The length of a motif can be set between a quarter note and 16 bars in

steps of a quarter note.

Loop - Motif Loop Mode

Motifs can be played continuously independent from the pattern length,

can be restarted at the end of the pattern or can be played just one time at

the beginning of a pattern.

Cont - Continuous playing of the motif. The motif repeats independently

from the pattern length.

Once - Motif will played one time only at the begin of the pattern.

Repeat - The motif repeats continuously but resets to the start position

on a pattern restart.

The Motif Edit Menu