User Manual

SPECTRALIS 2

3.9.10 Programming new rhythms with the beat-matrix

For the Spectralis realtime-access to all functions was a top priority. When we

were discussing the step-sequencer you surely have noticed that there is no

function, for which you will have to stop the sequencer. It’s no different with

the beat-matrix! For easier orientation here is a brief survey over the possibilities

of the beat-matrix:

- The beat-matrix has 11 tracks.

- The length of a bar can be set between 1/8 and 10/8.

This means an ordinary 4/4 bar has a length of 8/8! Of course the bar

measure can be set separately for each of the drum-tracks. If you are

curious what happens when you are playing a 7/8 beat against a 9/8,

the Spectralis will provide you with the necessary tools to find out.

- The length of the various beat-matrix tracks is completely indepen-

dent of each other and can be set from one to sixteen (!) bars.

- The beat-matrix grid for the rhythmic motifs can be adjusted across a

broad range. The highest resolution of the grid is an amazing 192th

note (!) which allows for very detailed editing not only of the rhythm

but also for the creation of special effects.

- Up to 16 are visible in the beat matrix at a time. Further steps or bars

can always be reached with the [Tempo/Shuttle]-Encoder.

Now let’s get started!

First select an empty song and within the song an empty pattern.

Next push the [Step/Accent]-button in the "Groove-Edit"-section. You will

see the following display message:

1/2:Part Sound Velo 3 3| 1 - 1

Kick 127 +20

The first encoder selects the part you want to edit the rhythm motif from. The

part -selection is available at the encoder buttons 1-11 as well. Just push the

encoder button of the desired drum part to change the selection. The third display

encoder allows for the input of velocity values from 0-127. The velocity

setting always is valid for all steps you are entering until you change the setting

again. If you just want to view a velocity setting of a step you already entered,

press the and hold [Shift]-button and press the num-button of the step you

want to view. The value instantly will become the default value for the following

steps. Start entering some steps by hitting the num-buutons and hear the results

instantly while the sequencer is still running.

Do you want to select another sound for the selected drumpart? Just follow the

following steps:

I. Chose the [Select]-Button and hold it down.

II. While holding down the [Select]-button, you can select another category

and/or sample. Don’t forget to confirm your selection by pushing the "Sound"-

encoder button.

III. After releasing the [Select]-button it will automatically revert to the "beat-

matrix" menu.

Beatmatrix programming of new rhythms