User's Manual

UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 10 of 95
GENERAL INFORMATION
The Radio Active Designs® UV-1G is a two-channel full-duplex UHF/VHF wireless intercom system that
utilizes up to six wireless Belt Pack units per Base Station.
Each Belt Pack is capable of simultaneous Talk and Listen on two separate audio channels.
Additionally, Belt Packs have Stage Announce and two-channel Wireless Talk-Around.
Wired Interface supports 2W Audiocom® (Telex), RTS® TW, and Clear-Com® varieties.
RJ-11 compatible jacks support 4W systems.
FEATURES
• Excellent RF noise immunity through revolutionary design
• Full duplex operation utilizes UHF transmitters and VHF receivers
• Support for up to six Belt Pack units in one Base Station
• Two wireless intercom channels
• Programmability via PC interface or User Interface in the field
• Internal antenna in Belt Pack
• Extremely low occupied bandwidth
• Frequency Response: 100Hz to 8kHz
• Audio Dynamic Range ≥ 50dB
• AES-48 Compliant
TERMINOLOGY
• LCD – Liquid Crystal Display
• LED – Light Emitting Diode
• WTA – Wireless Talk-Around
• SA – Stage Announce
• 4W – 4-Wire
• 2W – 2-Wire
• VHF – Very High Frequency
• UI – User Interface
• UHF – Ultra High Frequency
• IEC – International Electrotechnical Commission
• FCC – Federal Communications Commission
• RSSI – Received Signal Strength Indicator