User's Manual

UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 16 of 95
13. INTERCOM 1 SELECT
Momentary press toggles Intercom 1 between one of three options: 2-wire, 4-wire, Off
14. INTERCOM 2 OUTPUT GAIN
Momentary press to show Intercom 2 Output Gain screen on LCD
See Gain Adjustments section.
15. INTERCOM 2 INPUT GAIN
Momentary press to show Intercom 2 Input Gain screen on LCD
See Gain Adjustments section.
16. INTERCOM 2 SELECT
M
omentary press toggles Intercom 2 state between one of three options: 2-wire, 4-wire, Off
17. AUXILIARY OUTPUT GAIN
Momentary press to show Auxiliary Output Gain screen on LCD
See Gain Adjustments section.
18. AUXILIARY INPUT GAIN
Momentary press to show Auxiliary Input Gain screen on LCD
See Gain Adjustments section.
19. AUXILIARY ENABLE/DISABLE
Momentary press enables or disables Auxiliary Input and Output
20. PROGRAM PORT
The Program Port is a USB Micro-B compatible port that is used for configuring UV-1G Base
Stations and Belt Packs or upgrading firmware via the UV-1G PC Application. For convenience,
the UV-1G Belt Pack will power on when the cable is plugged in and connected to a PC, the Base
Station will not.
21. STAGE ANNOUNCE GAIN
M
omentary press to show Stage Announce Gain screen on LCD
See Gain Adjustments section.
22. CHANNEL 1 ENABLE/DISABLE
Momentary press toggles the ability for local headset to talk/listen on intercom Channel 1
23. CHANNEL 2 ENABLE/DISABLE
Momentary press toggles the ability for local headset to talk/listen on intercom Channel 2
24. HEADSET MICROPHONE GAIN
Momentary press to show Headset Microphone Gain screen on LCD
See Gain Adjustments section.
25. TALK BUTTON
Momentary button press latches local headset talk on channels determined by the status of 22
and 23
Press and hold for non-latching operation
26. HEADSET VOLUME
Headset volume audio potentiometer