User's Manual

UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 31 of 95
ADVANCED RECEIVER SETTINGS
The advanced receiver settings allow the user to adjust squelch and input attenuation settings for all
six receivers individually (R1- R6) or on a global basis. Additionally, receiver routing settings can be
configured in this menu.
• From home screen, press MENU, scroll to ADVANCED RX SETTINGS, press SELECT.
The screen will appear as follows:
EXIT
........Rx.Routing.Settings
........
To access the sensitivity settings, press SELECT. A new screen will appear as follows:
EXIT
........R1
........R2
The sensitivity settings include squelch and input attenuation. Any changes to these parameters under
the global selection will affect all six receivers. Alternatively, squelch and input attenuation can be set
individually for any receiver, one (R1) through six (R6).
The following is an example of selecting R1 for Sensitivity Settings:
EXIT....R1...........0
...........In.Atten:.0.dB
........
EXIT....R1.Squelch :.0
.....................0.dB
........
SAVE....R1.Squelch.:
...........In.Atten:.0.dB
BACK....
SAVE....R1.Squelch.:.0
...........In.Atten:
BACK....
• Use the encoder to change the value.
• Squelch options are 0 – 9.
• Input attenuation options are 0dB, 5dB, 10dB, and 20dB.
• Press SAVE to save the change or BACK to cancel.
To access the Rx Routing Settings, select it from the ADVANCED RX SETTINGS sub-menu within the
main menu.