User's Manual

UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 36 of 95
DISPLAY SETTINGS
Blackout Mode
.........................OFF
........Backlight Time : ON
BACK....LCD.Brightness.: 5
SAVE....Blackout Mode :
........Backlight Time : ON
BACK....LCD Brightness : 5
Blackout Mode allows the user to disable all the LEDs on the Base Station.
• From the home screen, press MENU, scroll down to Display Settings and press SELECT.
Blackout mode is the first display setting. There are four options: OFF, LEDs, BLGHT (backlight), and
ON.
ON means that both the backlight and LEDs will be disabled.
OFF means that both the backlight and LEDs operate normally.
LEDs means that just the LEDs will be disabled or blacked out.
BLGHT means that just the backlight will be disabled or blacked out.
• To change the blackout mode, press SELECT and then turn the encoder as shown above.
• Press the SAVE button to save the change or press BACK to ignore it.
Backlight Time
........Blackout Mode : OFF
.........................ON
BACK....LCD Brightness : 5
SAVE....Blackout Mode : OFF
........Backlight Time :
BACK....LCD Brightness : 5
The Backlight Time setting changes the amount of time the backlight stays on for.
• From the home screen, press MENU, scroll down to DISPLAY SETTINGS and press SELECT.
Backlight time is the second display setting. Each time any button is pressed or the encoder is turned
the backlight timer gets reset.
Options:
5S for 5 seconds
10S for 10 seconds
20S for 20 seconds
30S for 30 seconds
60S for 60 seconds
ON meaning it will never turn off.