User's Manual

UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 40 of 95
BASE STATION GAIN ADJUSTMENTS
Gain adjustments can be made to the following:
• Intercom inputs and outputs (2W and 4W)
• Auxiliary input and output
• Stage Announce
• Local headset microphone (described in the Local Hea
dset section)
All gains go from 0 – 32 except for the microphone gain goes from 1 – 32. ‘0’ means mute.
• To change one of the gain settings, press the appropriate gain button and then use the
encoder to adjust it.
The gain screen will go away after 30 seconds if no button press or encoder knob turn is made.
When changing one of the gains a bar graphic along with a number will be displayed on the screen to
show the current setting.
A label telling what gain it is, is also shown.
• Turn the encoder knob clockwise to increase the gain and counter clockwise to decrease the
gain. The change will take place immediately.
• When finished, press SAVE to save the change, otherwise press BACK, or wait for the
timeout to cancel any changes (the value will revert back).
INTERCOM 1 & 2
SAVE...COM 1 Input Gain
BACK...
The figure above shows an example of the Intercom gain screen.
AUXILIARY
SAVE...Aux Input Gain
BACK...
The figure above shows an example of the Auxiliary gain screen.