User's Manual

UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 49 of 95
ADVANCED SETTINGS
To get to the advanced settings, from the home screen, press the MENU button.
• Use either encoder to scroll down to ADVANCED SETTINGS.
• The screen will appear as follows:
Display Settings
Exit <BP ID> Mic G
• Once it is boxed, press SELECT.
Passcode Protection
The advanced settings menu can be passcode protected.
When the passcode is enabled, once the user presses select on ADVANCED SETTINGS, the screen will
appear as follows:
....Enter.Passcode:
.*..*..*..*
INFO..............BACK
The passcode is four digits where each digit can be any 0 – 9 number.
• Use either encoder to change the selected digit.
• Press S
ELECT to change the selected (boxed) digit.
• Once the last digit is entered press SELECT.
If the entered passcode is correct the Belt Pack will go to the advanced settings.
If it is incorrect Invalid Passcode will be display for three seconds before returning to the main menu.
...Invalid.Passcode
Tx Settings
BACK
See ENABLING/DISABLING THE PASSCODE and/or CHANGING THE PASSCODE for more information.