User's Manual

UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 75 of 95
MIC & HEADSET
Mic Gain
The gain can be from 1 to 32.
Earphone Setting
This setting controls where the receiver audio gets routed, to the left and/or right earphone. If
Separate is selected, audio for Receiver 1 will be routed to the left earphone and audio for Receiver 2
will be routed to the right earphone. If Combined is chosen, audio for both receivers will be routed to
both earphones. Note: if only one receiver is enabled then audio to that receiver will be routed to both
earphones no matter what headset option is chosen.
Minimum Volume
Allows the user to set a minimum volume level for the headset audio.
MASTER VOLUME
The Master Volume menu option allows the user to set a ratio for the audio levels of both receiver
channels that will be heard in the headset. By default, the ratio is Ch 1 = Ch 2.
Ratio
Ch 1 + 12dB, Ch 1 + 10dB, Ch 1 + 8dB, Ch 1 + 6dB, Ch 1 + 4dB, Ch 1 + 2dB, Ch 1 = Ch 2, Ch 2 + 2dB, Ch 2
+ 4dB, Ch 2 + 6dB, Ch 2 + 8dB, Ch 2 + 10dB, Ch 2 + 12dB
Enable
If not selected, the volume controls will be independent for each channel.
PROGRAM
The Program button brings up the Write to Belt Packs dialog.
BELT PACK CONNECTED