User's Manual

Radio Activity S.r.l. 33 / 44
5 Parameters configuration and Remote Control
Working parameter of the station are completely programmable through a SW package and a PC connection.
The visible (and programmable) parameters set is very wide and extends from radio channel setting to tuning
voltage measure of each local oscillator. The software is called KAIROS_Manager for single base-stations or
DMR_NetControl for network systems.
Remote diagnostic of radio stations from PC can be performed through the Ethernet interface of the station.
This interface is absolutely standard and very diffused, so relatively simple to be remoted. Radio Activity
stations can be equipped with an external GPRS modem which will provide remote access to the station, if
the installation site is covered by this service and if the Mobile Provider allows the machine to machine
connection. Each operation can be remotely performed, exactly the same as in local connection, including
FW down-loading, configuration Down-loading and up-loading, station check, parameters changing.
Communication and supervision unit can spontaneously transmit diagnostic messages if defined “self-
alarming” events happen. This is useful to automatically check the stations.
Here following an example of remote control forms:
For further details about remote control software, refer to proper documentation (SW user manuals).