Digital BUS-WATCH® PC Software Manual Digital ® BUS-WATCH PC Software Manual BUS-WATCH® Live View And BUS-WATCH® Play Back Applications For Rx001 Mobile DVRs Radio Engineering Industries, Inc.
Digital BUS-WATCH® PC Software Manual Table of Contents Table of Contents .......................................................................................... 2 Software Installation..................................................................................... 5 Host PC Recommended System Requirements .............................................................. 5 Setup ............................................................................................................................
Digital BUS-WATCH® PC Software Manual Table of Contents (Continued) DVR Information Display......................................................................................... 29 Full Screen View....................................................................................................... 29 Title Button ............................................................................................................... 30 Playback Control............................................................
Digital BUS-WATCH® PC Software Manual Table of Contents (Continued) Network Setup............................................................................................. 42 Setup ............................................................................................................................. 42 Devices tab................................................................................................................ 42 DVR Groups ............................................................
Digital BUS-WATCH® PC Software Manual Software Installation Host PC Recommended System Requirements Microsoft Windows XP 1.7 GHz Pentium IV processor or AMD equivalent 512MB of RAM Dedicated AGP/PCI-express Video Card / Controller with 128MB of RAM (non-shared) LCD or CRT monitors supporting 1024 X 768 resolution 10/100 Base-T Network Interface Card / Controller USB 2.0 controller (minimum 1 port available) DVD±R Drive * Hard drive with 10GB free space ** * CDROM drive required for installation.
Digital BUS-WATCH® PC Software Manual Series Part 3 is Backing-up Video from REI Search Application. Quick Guide Series Part 4 is Archive Video Files to a CD/DVD. Live View Application Overview BUS-WATCH® Live View PC Software provides for the simultaneous viewing (monitoring) of multiple channels of live video from multiple networks connected Rx001 Mobile DVRs.
Digital BUS-WATCH® PC Software Manual Setup The Setup functions of the BUS-WATCH® Live View PC Software are available from the Setup dialog box. The Setup dialog box is accessed by clicking the Setup Button at the bottom of the BUS-WATCH® Live View application interface. The available setup functions of the Setup dialog box are organized into tabs at the top of the dialog box.
Digital BUS-WATCH® PC Software Manual Window View selection box Window configurations displaying 1, 4, 6, 8, 9, 10, 13, or 16 video windows simultaneously can be selected using the selection box. Upon selection of a window configuration, the video windows in the viewing area of the interface are rearranged to provide the selected number of video windows. Regardless of configuration, a total of 16 video windows are available for viewing.
Digital BUS-WATCH® PC Software Manual Information displayed includes the current status of sensor inputs, panic button and the time / date from the source DVR internal clock/calendar. Additional information may include, if available, current vehicle speed, GPS coordinates, raw accelerometer data, and troubleshooting data. DVR Information Display In single channel view, The Previous Page and Next Page selections can be used to select a specific video window from the 16 available video windows.
Digital BUS-WATCH® PC Software Manual Channel assignment of DVR channels to video windows will occur sequentially starting with video window #1. Channel 1 of a single channel R1001 DVR will be assigned to video window 1, channels 1 through 4 of a R4001 DVR will be assigned to video channels 1 through 4 and channels 1 through 8 of a R8001 DVR will be assigned to video channels 1 through 8.
Digital BUS-WATCH® PC Software Manual Video Window Selection Box Window Setup Function Individual video windows in the viewing area may be assigned to a specific channel from an available source DVR using the Window Setup function. To use the Window Setup function, select a video window visible in the viewing area and right click on the window. A selection box will appear. Choose the Window Setup option to display the Window Setup box. Radio Engineering Industries, Inc.
Digital BUS-WATCH® PC Software Manual Window Setup Box To assign a specific channel from a specific DVR to the currently selected video window, select the source DVR from the list of available DVRs by clicking on the down arrow from the Name field, this will open the Device List window that displays a list of availably DVRs. Select the correct DVR to be returned to the Window Setup Box. Radio Engineering Industries, Inc.
Digital BUS-WATCH® PC Software Manual Device List Window To view a list of available channels (cameras) for the selected DVR, click on the Channel down arrow. A drop down list will appear in the Channel Box for selection of the proper channel. Radio Engineering Industries, Inc.
Digital BUS-WATCH® PC Software Manual Channel (Cameras) Selection Box Click OK to accept the DVR / channel selection, assign the channel to the selected video window, and return to the main application interface. Click Cancel to return to the application without changing the channel assignment.
Digital BUS-WATCH® PC Software Manual Close / Close All Functions To stop live view of video in a specific video window, select the video window and choose the Close function from the selection box displayed by clicking the right mouse button on the selected video window. Live video display on the selected window will cease. The current channel assignment for the selected window will not change, and the title at the top of the window will continue to display the DVR name and channel name.
Digital BUS-WATCH® PC Software Manual video window. Live view in all video windows will cease, and channel assignments change to display the channel name only. Full Screen Multiple video windows or a single video window, as currently arranged in the viewing area, may be displayed full screen. In full screen mode, the application interface is hidden, and the viewing area is expanded to fill the entire computer screen.
Digital BUS-WATCH® PC Software Manual Audio monitoring may be disabled (muted) by clicking the Audio Button located along the bottom of the BUS-WATCH® Live View application interface. Once the button is depressed, the audio text changes to orange. Click the Audio icon to press or depress the button. The audio will be heard (un-muted) when the button is in the up position, and will be muted when in the down position and the text is orange.
Digital BUS-WATCH® PC Software Manual the standard directory while the Record Button is in the pressed state. Once the button is depressed, the Record text will change to orange. To stop recording, press the Record Button to return it to the up state. Recording will stop and the resulting video file will be written to the standard directory. Video files captured using the BUS-WATCH® Live View application video capture function is viewed using the DVR Search application.
Digital BUS-WATCH® PC Software Manual Remote Control Dialog Box Menu Selection The REI Rx001 LiveView and PlayBack PC Software application includes a Menu Function Button that allows three separate operations to be performed within the BUSWATCH® Live View application. The Menu Button of the BUS-WATCH® Live View application may be used by all users to display information within the Info Box, to view logged events, and open the About window.
Digital BUS-WATCH® PC Software Manual Box is Hide Info Box. If the Hide Info Box is selected, the green information box will disappear and the blank gray box will be displayed. About The last option is the About window. This window will display computer name, IP address, Info Code, Version Number, Build Date, and general information about BUSWATCH® Live View software. This information will be File Name, File Version, and Edit Date.
Digital BUS-WATCH® PC Software Manual Source Selection To use the BUS-WATCH® Play back application, the video source containing the recorded video to be searched, viewed, and/or backed-up by the application must be selected. Sources are selected using the source buttons located along the right side of the application.
Digital BUS-WATCH® PC Software Manual Rx001 Mobile DVR (Network Connection) The BUS-WATCH® Play back application can be used to view video currently stored on an Rx001Mobile DVR through an active network connection between the DVR and the host PC. To access video stored on a Rx001 Mobile DVR using the BUS-WATCH® Play back application, the target DVR network settings must be properly configured, an active network connection between the host PC and the DVR must exist, and the DVR must be powered on.
Digital BUS-WATCH® PC Software Manual R DIGITAL BUS-WATCH DVR BUS-WATCH R4001 PWR ETHERNET USB 2.0 HTR CAM1 CAM2 CAM3 CAM4 REC HDD FAULT HDD FULL R L AUDIO OUT VIDEO OUT R FRONT VIEW ETHERNET ETHERNET PORT PC NETWORK CROSSOVER CABLE 530068 OR EQUIVALENT Rx001 Mobile DVR Crossover Cable Connection Diagram To view video on a network connected Rx001 Mobile DVR, set the video source for the BUS-WATCH® Play back application accordingly by clicking the Remote DVR source button.
Digital BUS-WATCH® PC Software Manual Select Server Dialog Box Select the target DVR from the list of available DVRs, and click OK to accept selection. A network connection will be established between the BUS-WATCH® Play back application and the target DVR, and dates with available video will be highlighted on the calendar display in the upper left corner of the screen. Use the arrows on top of the calendar to page to the desired month and year.
Digital BUS-WATCH® PC Software Manual during live view mode. Please see the section titled DVR Remote Management System in this manual for more information on using the DVR Remote Management System application and Video Capture function. To view captured video stored on the host PC, set the video source for the BUSWATCH® Play back application to the Live View application captured video by clicking the Captured source button.
Digital BUS-WATCH® PC Software Manual Rx001 Hard Drive Module The BUS-WATCH® Play back application can be used to view video stored on a R1001/R4001 Hard Drive Module connected to the host PC via a USB connection. To view video stored on an Rx001 hard drive module using the BUS-WATCH® Play back application, first connect the hard drive module to a USB port on the host PC using a standard USB 2.0 A-B cable. Note: A USB A-B cable is included with every Rx001 Mobile DVR. If not available, a standard USB 2.
Digital BUS-WATCH® PC Software Manual Please see the sections titled Date/Time Selection and Playback Control for more information on selecting and viewing video. Backup Video File The BUS-WATCH® Play back application can be used to view video backed-up to the host PC using the BUS-WATCH® Play back application Backup function. Please see the section titled Video Backup for information on using the BUS-WATCH® Play back application Backup function.
Digital BUS-WATCH® PC Software Manual The video segment list displays available video segments. Each segment in the segment list contains video for a specific period of time. The starting and ending times of the available segments are shown in the list. Video Segment List Note: The Rx001 Mobile DVR records video as multiple files, or segments, with each file containing a specific duration of video.
Digital BUS-WATCH® PC Software Manual given session, and video for that source only will be displayed in the viewing area during that session. The BUS-WATCH® Play back application will playback and display video from either single channel (R1001), four channels (R4001) or eight channels (R8001) DVRs. The viewing area may therefore be configured to include one or four video windows, to display video from one or four channels simultaneously.
Digital BUS-WATCH® PC Software Manual The application interface will be hidden and the viewing area, including the video windows currently displayed, will be expanded to display full screen. The view may be changed from single channel to four channel view, and vice-versa, by double-clicking on the video windows in the display area, and the DVR information display will appear in single channel view mode, as in the normal display mode.
Digital BUS-WATCH® PC Software Manual progress bar during playback to indicate the current playback position of the currently playing video segment or video segments. The progress bar has two view modes that can be selected. File view displays the progress of the currently playing video segment, and Day View displays progress when multiple video segments from the selected date are present in the play list.
Digital BUS-WATCH® PC Software Manual Boxes corresponding to hours of the selected date (day) with available video are highlighted, and the currently selected hour is designated by an oval encircling the hour identifier. Hours for which no video is available are grayed out and cannot be selected. A specific hour can be selected by clicking the appropriate box corresponding to that hour. Clicking an hour starts playback of the first available video segment in the selected hour.
Digital BUS-WATCH® PC Software Manual During playback, the BUS-WATCH® Play back application reads and buffers video from the currently selected video segment at a rate slightly higher than required for playback to assure uninterrupted playback. When playback is paused or in a similar mode, buffering continues until the entire current video segment is buffered. Buffered video from the current segment is indicated by a light green bar filling in the area behind the progress bar slider.
Digital BUS-WATCH® PC Software Manual Pause / Play Button or The Pause / Play function is a dual function button which starts or pauses playback. In any mode, when the Play symbol is displayed, pressing the button starts playback at the current location. During playback, the button symbol changes to the Pause symbol. Pressing the button in Play mode will pause the video. The current video image is frozen on the screen. Pressing the button again starts playback.
Digital BUS-WATCH® PC Software Manual The video screen goes to black when stopped. Playback Speed Control Speed Control Dialog Box The playback speed during play mode can be increased or decreased using the Play Speed Control. The control can set playback speed to 1/16, ⅛, ¼, ½, and 1 (normal), 2, 4, 8, or 16 times the speed of real-time playback. The Play Speed Control setting affects playback speed during play mode, when video is actively played back. The control has no affect in other modes.
Digital BUS-WATCH® PC Software Manual Snap (Snap Picture) Button The BUS-WATCH® Live View application image capture function can capture a still image from the live video appearing in an active video window, and print or save the captured image. To capture a still image from video appearing in an active video window, select the video window and click the Snap Button located at the bottom of the application interface.
Digital BUS-WATCH® PC Software Manual Edit Clip Button This button allows video to be edited by date and time if this information is known by the user. Clicking on this button opens a Backup Info window. Within this window, the user enters the date and time to be backed up. Edit Clip Window by Known Date and Time Add Clip and Delete Clip Buttons These buttons allow the user to edit video if the time is unknown. The user can review the video segment for the starting point.
Digital BUS-WATCH® PC Software Manual can click on the Add Clip Button, which stops the video. To get the video to play again, click on the Play Button. Once the end point is recognized, click on the Add Clip Button to stop the editing process. The edited video is highlighted in blue between two blue time lines. A Backup Info window opens, enabling the user to save this edited video file. To save this file, click OK to start the process. If the edited video needs to be deleted, click the Delete Clip Button.
Digital BUS-WATCH® PC Software Manual to use map controls allow the end user to customize the information display to quickly see the whole picture. It saves time and money by allowing the customer to review the event without questions of where the vehicle was at. The GPS tied with video surveillance can that corroborate the driver’s side of the story so that they can focus on safely doing their jobs to the best of their abilities without the concern of being falsely accused of wrongdoing.
Digital BUS-WATCH® PC Software Manual Zoom In Icon • • Select Zoom In Icon Left click anywhere on the map to zoom out from that point Bus Center Icon • • • • Select Bus Center Icon to activate Select Bus Center Icon again to de-activate When activated, bus cannot leave map area, map will re-center on bus when it moves off the screen Map will center on bus if it is not on the screen when activated Full Screen Map Icon • • • Select Full Screen Map Icon to activate Select Full Screen Map again to de-acti
Digital BUS-WATCH® PC Software Manual Map Button • • • Select the Map Button to bring up the map to an extra video viewing window Select the Map Button again to remove the map from the extra viewing window Depending on the processing power of the computer, the amount of time it takes to draw the map can vary Map Setup Button • • • • Select the Map Setup Button if directed by REI Technical Support to do so Allows the customer to be able to get new map upgrades or have multiple region maps Map Data will b
Digital BUS-WATCH® PC Software Manual Network Setup Setup The Setup functions of the Digital BUS-WATCH® surveillance system are available from the Setup dialog box. The Setup dialog box is accessed by clicking the Setup Button at the bottom of the BUSWATCH® Live view application interface or the BUS-WATCH® Play back application.
Digital BUS-WATCH® PC Software Manual Setup – Devices Tab DVR Groups DVR entries in Devices Setup are organized into groups and subgroups. Each group or subgroup may contain entries for multiple DVRs and other subgroups. The Device Setup tab of the Setup dialog box is divided into two panes. The left pane lists DVR groups, and the right pane lists DVR entries within the currently selected group. At least one group must exist to contain DVR entries. The first group created in Device Setup is the root group.
Digital BUS-WATCH® PC Software Manual Group Setup Dialog Box • • • • Enter a name for the group in the Group Name text box. The group name is the name the Digital BUS-WATCH® surveillance system will display to identify the group. Group names are arbitrary. Create a name descriptive of the group to be created. Optionally, type a description for the group, in the Describe box. Click the OK Button to accept the group name and create the new group.
Digital BUS-WATCH® PC Software Manual • The group will be removed from the group list. DVR Information DVR Info dialog box The DVR information needed by the Digital BUS-WATCH® surveillance system to establish a network connection to the specified DVR must be entered into the fields of the DVR Info dialog box.
Digital BUS-WATCH® PC Software Manual I-Frame: Set this to Y on DVRs that will be connected through a cell phone tower network. The DVR will record all video but send back only the I-Frames Channel Name: Descriptive display name for each channel (camera) of this DVR (Optional – can be left blank) * Note: The values in the IP address (Addr) and port fields must match the settings of the target DVR.
Digital BUS-WATCH® PC Software Manual Captured Button Function is selected within the REI Search Application, the default location can be accessed to choose the captured video for viewing. Please see page 24 for more details. Setup – System Tab The default settings are as follows: Reconnect Count 3 Reconnect Time (Sec) 8 Disk Setup The amount of the drive to be used for storage can be changed by selecting the drive and pressing Modify. This will bring up the Disk Setup dialog box.
Digital BUS-WATCH® PC Software Manual Disk Setup dialog box Move the slider to select the amount of disk space to use for the selected drive and press Ok. The selection will take place on exit from the Digital BUS-WATCH® surveillance system setup application. Radio Engineering Industries, Inc.
Digital BUS-WATCH® PC Software Manual Remote Control Remote Control The BUS-WATCH® Live view application includes a remote control function to perform operations on a network connected R1001/R4001/R8001 Mobile Digital Video Recorder (DVR).
Digital BUS-WATCH® PC Software Manual To perform remote operations on a DVR, select the DVR from the list of DVRs, and click the Connect to DVR Button located below the DVR list pane. The BUS-WATCH® Live view application will establish a network connection to the selected DVR, if available. Note: The selected DVR must be powered on and connected to the network to perform remote operations on the DVR.
Digital BUS-WATCH® PC Software Manual Remote restart dialog box Selecting the restart function from the list of operations will display a confirmation dialog box. Click OK to initiate a reboot on the selected DVR, or Cancel to skip the operation and return to the Remote Control dialog box. Upon confirmation of remote restart, the selected DVR will begin the restart process. Recording on the DVR will stop, and the DVR will restart after a short interval (approximately 1 minute).
Digital BUS-WATCH® PC Software Manual Configure Device Setup Application The configuration settings are organized into tabs matching the menu items of the R1001/R4001/R8001 Mobile DVR firmware. Each tab includes sub-tabs representing sub-menu items in the DVR firmware. Each configuration setting contained in each tab or sub-tab may be edited by directly typing a new value into the selected field, or selecting an option from the drop down list activated by clicking the arrow to the right of certain fields.
Digital BUS-WATCH® PC Software Manual selected DVR. Click OK to close the message dialog box and return to the Remote Control dialog box. To export, or save, the configuration settings on all tabs to a configuration file, click the Export Button. A dialog box will appear. Select the drive and directory to which to save the configuration file, and enter a file name for the configuration file. Click Save to create the configuration file.
Digital BUS-WATCH® PC Software Manual After the firmware update file has been selected, click the Update Button to accept the selected file and begin the firmware update process on the selected DVR. The progress of the firmware update will be indicated by the progress bar below the Source File field. Once complete, a dialog box confirming that the firmware update has been successfully applied will appear. Click OK to close the confirmation dialog box.
Digital BUS-WATCH® PC Software Manual Once the Format Button is selected, the HDD will begin to format and a progress bar will be displayed (approximately 2 minutes to complete this process). Format HDD Window Upon confirmation of remote format, a HDD Formatting Succeeded window appears. By clicking the OK Button, the selected DVR will begin the restart process. The DVR will restart after a short interval (approximately 1 minute).
Digital BUS-WATCH® PC Software Manual Remote Log View Box Radio Engineering Industries, Inc.
Digital BUS-WATCH® PC Software Manual Video Backup Video Backup The Video Backup function is the function of the BUS-WATCH® Play Back application used to backup video segments from Rx001 Mobile DVR through an active network connection. The Video Backup function is accessed by clicking the Backup Button located in the upper right side of the interface. Clicking the Backup Button will open the Backup dialog box.
Digital BUS-WATCH® PC Software Manual Backup dialog box - Backup Setup Tab To set the Backup Output Directory, click the Browse Button to the right of the Output Dir field in the dialog box. The Browse for Folder dialog box will appear. Browse dialog box Select the destination drive and folder using the dialog box. Use the Make New Folder Button to create a new folder if the target folder does not already exist. Radio Engineering Industries, Inc.
Digital BUS-WATCH® PC Software Manual The output drive letter, directory can be any drive letter, directory that is accessible on the host PC, including network drives (provided they are mapped to a local drive letter), and removable drives. After the output folder has been selected, video segments from the remote DVR will be copied to this folder by the backup function. File Backup There are multiple methods to select video segments for backup.
Digital BUS-WATCH® PC Software Manual Search Video File dialog box The date to search for video segments is selected using the Date box in the upper right corner of the dialog box. A calendar is provided for date selection. The currently selected month and year are displayed on the top of the calendar. Use the arrow keys to the left and right of the calendar to select the desired month and year. Select the day for which to search for video segments by clicking the day number in the calendar.
Digital BUS-WATCH® PC Software Manual Select Device dialog box The Select Device dialog box will include DVRs configured using the Device Setup function of the Digital BUS-WATCH® surveillance system software. Select the source DVR from the available devices in the Select Device dialog box and press OK. Click the Search Button to retrieve a list of video segments currently available on the selected DVR on the specified date.
Digital BUS-WATCH® PC Software Manual Search Video File Dialog Box The start and end time of all available video segments will be displayed in the left pane. To select video segments for backup, highlight the desired video segments. Single or multiple video segments may be selected simultaneously.
Digital BUS-WATCH® PC Software Manual clicking the OK Button at the bottom of the dialog box. The BUS-WATCH® Play Back box will be displayed with a yes or no box. Select yes to continue with the backup, or no to cancel. Alternately, click CANCEL to discard the backup list and skip backup. Clicking OK or CANCEL will exit the Search Video File Select dialog box and return to the File Backup tab of the Backup dialog box.
Digital BUS-WATCH® PC Software Manual The backup status of each video segment is displayed in the backup queue list. Symbols are used to denote the backup status of each video segment. Segments, which are waiting for backup, will be designated by a green plus (+). Segments in the process of being backed-up are indicated by a green arrow (>) and segments for which backup has been completed successfully will be marked by a green check (√).
Digital BUS-WATCH® PC Software Manual Partial backups are not saved, and are discarded when the Stop Backup function is used to stop backup of a video segment for which backup is currently in-progress. To delete video segments from the queue, select the video segments in the queue list, and select Del Backup from the selection dialog. Backup for the selected segments will be cancelled, and the selected video segment(s) will be removed from the backup queue.
Digital BUS-WATCH® PC Software Manual Backup dialog box – TimeSpan Backup Tab A list of entries for search and potential backup is shown in the Backup List on the TimeSpan Backup tab. The search criteria for each entry in the Backup List is entered or modified using the Backup Info dialog box. To create a new entry in the Backup List, click the Add Button located below the Backup List. The Backup Info dialog box will appear. Radio Engineering Industries, Inc.
Digital BUS-WATCH® PC Software Manual Backup Info Dialog Box The source device from which to search and backup video segments is selected using the Device drop down list. Open the Device drop down list by clicking the arrow to the right of the device name. The Device drop down list will include DVRs configured using the Device Setup function of the DVR Remote Management System software.
Digital BUS-WATCH® PC Software Manual Specify the ending date and time for the search in the same manner in the End Time fields. The Rx001 Mobile DVR can tag video segments associated with a specific event, or alarm, for separate retrieval. Please see the Rx001 Mobile DVR user’s manual for information on setting up alarm video recording. Next, type a descriptive name for this search in the Name box.
Digital BUS-WATCH® PC Software Manual TimeSpan Backup Process Dialog Box The status of the search is displayed in the dialog box. If video segments matching the search criteria are found, a success message will be displayed. If no video segments are found, an error message will be displayed. After the completion of the search, close the TimeSpan Backup Process dialog box by clicking the Close Button.
Digital BUS-WATCH® PC Software Manual along with the distribution rights to ensure that proper uses and distribution of software are being used. Video Convert Button Direct Video Segment Backup An alternate method of adding video segments to the backup queue is to select individual video segments from the segment list on the left side of the DVR Search application for immediate backup. Note: This function will work with either Rx001 Mobile DVRs or Rx001 Hard Drive Modules.
Digital BUS-WATCH® PC Software Manual Video Segment List – Backup File To select a specific video segment in the list for backup, select and right click an individual file in the list to display a pop-up selection box. To add the selected video segment to the backup queue, select the Backup File option from the pop-up selection box. The selected video segment will be immediately added to the backup queue.
Digital BUS-WATCH® PC Software Manual or Snap (Image Capture) Icon The image appearing in the selected video window at the instant the Snap Button was pressed will be captured. The Image View dialog box will appear, and the captured image will be displayed in the image area of the dialog box. Image View Picture Dialog Box Save Button The captured image may be saved as a still image file on local or remote storage. Click the Save Button to save this snapshot to an image file.
Digital BUS-WATCH® PC Software Manual view the saved files for selection. Once the file is selected, click the Open Button to view the image. Open File Dialog Box Radio Engineering Industries, Inc.
Digital BUS-WATCH® PC Software Manual Text Button Clicking on the Text Button opens the Text Box. This allows the user to insert a heading in the upper left hand corner of the saved image. The purpose is to create a title for the saved image. Check the Show Text box and enter the title in the Content Field. This title can be hidden by using one of two options. The first option is checking the Transparent Background box. This hides the title by placing it in the background.
Digital BUS-WATCH® PC Software Manual Printer Dialog Window Zoom Slide Bar The Zoom Slide Bar enables the user to zoom in on a captured image. This process is performed by sliding the bar to the right, to the desired size. After the image has been increased in size, left click and hold the mouse on the image to select it, and drag to reposition the image. Move the mouse to the left, right, up or down to correctly position the image.
