Cat No.
Table of Contents Table of Contents Table of Contents.......................………… .......................………… ..........…. 1 Introduction.....................………… .......................………… ............………… 3 Features.....................………… .......................………… ...........……………. 3 Key Layout.....................………… .......................………… .............. ............ 4 Basic Key Functions.....................………… .......................………… .............5 Mode Key Functions.....................
Table of Contents Channel Key Priority-Press Setup – VCR…………………………………… 16 Volume Key Priority-Press……………………………………………………..17 Volume Key Priority-Press Setup – TV……………………………………….17 Volume Key Priority-Press Setup – CBL/SAT………………………………. 17 Volume Key Priority-Press Setup – VCR……………………………………. 17 Volume Key Priority-Press Setup – DVD ………………………………………. 17 Turn On Transport Key Priority-Press…………………………………………… 17 Turn On Menu Keys Priority-Press……………………………………………….
INTRODUCTION Introduction Your new Guide Remote* allows you to control your TV, VCR, cable/SAT/DSS converter, and DVD player, all in one easy to use remote control. The design includes the functions used most often to operate TV, VCR, Cable converters and Satellite receivers and DVD Players. This manual includes a list of 4-digit manufacturer’s codes for TVs, VCRs, Cable and Satellite converters and DVD players.
INTRODUCTION KEY LAYOUT Your Guide Remote* controls the four most used functions in your home entertainment center, the TV, VCR/PVR, Cable/SAT and DVD player. After the initial set up, the command keys will work similar to the keys on your original remote control.
INTRODUCTION BASIC KEY FUNCTIONS The following table details the list of all keys on the Guide Remote* and how they function. P Use to program the remote to control your devices. LIGHT Use to turn the backlight on or off. When the backlight key is pressed, the backlight will turn on for 5 seconds. Each time any key is pressed, the 5second timer is re-primed. If no key is pressed during the 5-second interval, the backlight will turn off.
INTRODUCTION MODE KEY FUNCTIONS The table below details the function of selected keys in the various modes.
INTRODUCTION INSTALL BATTERIES The battery cover is located on the back of the remote. Pay close attention to the direction of the batteries. Align the poles (+ and -) as indicated in the battery compartment. Remove battery case cover to install the batteries in the remote control. 1. Press firmly on the arrow on the back of the remote to remove the battery cover. 2. Insert four new 1.5-volt AA alkaline batteries, taking care to align the polarity symbols ( + and - ) as marked inside the battery case. 3.
Remote Control REMOTE SETUP You can use the remote control’s device keys to control the following devices: TV (television), VCR (Video Cassette Recorder), CBL/SAT (Cable converter or Satellite/Digital Satellite System receiver) or DVD (Digital Video Device) Player. The default brands and codes preset in the remote are as follows: • RCA TV (0200), • RCA SAT receiver (0496), • RCA VCR (0817) and • RCA DVD player (0450) To control devices other than the default brands perform the following steps.
Remote Control MANUAL CODE SEARCH If the Guide Remote* does not operate your device, when set up, you may not have entered the correct 4-digit code. You may manually search for codes in each device category to locate one that operates your brand of device. See page 26 for list of Manufacturer’s codes. To manually search for a codes that works on your device perform the following steps. 1. Press device key (TV, VCR, CBL/SAT or DVD). The red light blinks one time. 2. Press the P key.
Remote Control VIEW DEVICE CODES To determine the 4-digit code for each device set up in your remote perform the following steps: VIEWING CODES 1. Press the desired device key (TV, VCR, CBL/SAT or DVD). The red light blinks one time. 2. Press P key. The red light blinks two times. 3. Press number 1 digit key. Press P key. Count the blinks (for example, if the red light blinks five times the first digit in the code is 5). Write down the number.
Remote Control PROGRAMMING MACROS The Guide Remote* has two hard keys for programming macros. Program each macro key to send one command containing up to 32 keystrokes. RECORDING MACRO Perform these steps to program macros. 1. Press any device key (TV, VCR, CBL/SAT or DVD). The red light blinks one time. 2. Press the P key. The red light blinks one time. 3. Press Macro Key 1 or 2. The red light blinks 3 times. 4. Press the desired keys (TV, VCR, POWER, CH +, PLAY, etc.
Remote Control VOLUME LOCK Your remote’s Volume Lock is preset to ON, so the volume and mute keys only control the TV volume, no matter which device is selected. If your device (CBL, VCR or SAT) has volume keys, the remote will ignore them and control volume through your TV. If you want to control the volume of other devices through your TV, skip the next section. Note: TV/VCR Combo devices do not use this feature.
Remote Control TURN ON VOLUME LOCK You can turn on or reset Volume Lock to control volume through your TV by performing the following steps: Note: If no device is set up in the selected mode, the remote will punch-through and attempt to find one. If none is found, it will not send the volume lock command. Volume Lock – Cable Converter or SAT/DSS Receiver 1. Press CBL/SAT key. The red light blinks one time. 2. Press P key. The red light blinks two times. 3. Press number 5 digit key.
Remote Control PRIORITY-PRESS Priority-Press gives you the ability to assign common functions to keys associated with your entertainment devices, regardless of which mode you are in, with the press of one key. Once set up, priority-press keys will only control the assigned device, regardless of the currently active mode.
Remote Control PRIORITY-PRESS KEY CLASS TABLE The table below details the classification of Priority-Press keys (See Page 14 for more information on Priority-Press).
Remote Control TURN ON POWER KEY PRIORITY-PRESS The Power key class is the POWER key. To setup Power class key perform the following steps: Power Key Priority-Press Setup 1. Press a device key (TV, VCR, CBL/SAT or DVD). The red light blinks one time. 2. Press P key. The red light blinks two times. 3. Press Power Key. The red light blinks three times. When the POWER key is pressed, power on/off will only work for the selected device.
Remote Control VOLUME KEY PRIORITY-PRESS The Volume class keys are VOL+, VOL- and MUTE. To set up volume class key perform the following steps: Volume Key Priority-Press Setup – TV 1. Press TV key. The red light blinks one time. 2. Press P key. The red light blinks two times. 3. Press VOL+, VOL- or MUTE key. The red light blinks three times. When the VOL+, VOL- or MUTE keys are pressed, the volume will only be controlled through the TV. Volume Key Priority-Press Setup – CBL/SAT 1. Press CBL/SAT key.
Remote Control TURN ON MENU KEY PRIORITY-PRESS The Menu class keys are MENU, SELECT, GUIDE, INFO, EXIT and Navigation arrows. To setup and turn on menu class key to various devices perform the following steps: Menu Key Priority-Press Setup 1. Press device key (TV, VCR, CBL/SAT or DVD). The red light blinks one time. 2. Press P key. The red light blinks two times. 3. Press Menu Class Keys. The red light blinks three times. When a Menu Class key is pressed, the menu will only work for the selected device.
Remote Control BACKLIGHT • Press the LIGHT key to turn on the backlight. When the LIGHT key is pressed, the backlight is preset to stay on for 5 seconds. • Each time any key is pressed, the 5 second timeout is reset. If no key is pressed for 5 seconds, the backlight will turn off. • If the LIGHT key is pressed while the backlight is on, it will turn off. The backlight on your remote can be set to turn on and stay on for up to 10 seconds.
COMPUTER REQUIREMENTS Minimum system requirements for software installation and use: A PC running Windows 98SE / 1ME / 2000 / 2XP Internet Explorer 5.0+, Netscape 4.0+ or AOL 5.0+ Browser Note: Microsoft Internet Explorer 5.0 must be installed on your computer even if it is not your default browser, because RemoteLinker II uses resource files provided only with Internet Explorer. An available USB Port. A CD ROM Drive. Minimum of 5 MB free hard disk space. Minimum of 8 MB RAM.
Activating Guide ACTIVATING GUIDE Verify or establish an active connection to the Internet. You must be online to complete the activation process. Verify the connection or connect the RemoteLinker* cable to the remote and PC. An Activation page should appear. 1. First-time Users (Only) Click on the “Register Me” button to continue the activation process. Click here to continue Activation 2.
Activating Guide ACTIVATING GUIDE (CONTINUED) 3. Select Guide Lineup You may customize the Guide downloaded in your Guide Remote* in the SETTINGS section at the Web site. Some of the customization features are as follows: a. Week Day Guide – If you only watch TV Monday through Friday you may choose to select only a customized Week Day Guide. If you only watch TV the mornings, afternoon, or evenings, you may choose to only download TV Listings for the part of the day that you watch TV. b.
Using the Guide DOWNLOAD TV LISTINGS You will see a message on your new Guide Remote* display screen indicating you can download or update the Guide Listings in you remote. Under these three conditions, you will see the Download New Data message on your remotes display screen. • New Guide Remote that has not been synced for the first time. • RemoteLinker II cable is connected to Guide Remote and computer.
Using the Guide USING GUIDE KEY Your Guide Remote*contains two types of TV Listings, Guide Listings and Program Details. It also contains an Information Screen. ACCESSING GUIDE SCREENS 1. Press the GUIDE key once to access the program Title Screen. 2. Press the GUIDE key a second time to the program Detail Screen. 3. Press the GUIDE key a third time to go to the Information Screen. Continue to press of the GUIDE key to toggle to the next screen.
Using the Guide TITLE SCREEN Personalize TV Listings of up to 7 days at the Web site and download them into your Guide Remote*. Below is an example of a typical screen you will see when scrolling through the TV Listings. Press the Left and Right Arrows to view the TV Listings in previous or next half-hour timeslot. Press the Up and Down Arrows to view the TV Listings for additional shows in the channel lineup.
Manufacturers’ Codes MANUFACTURERS’ CODES The following lists tell you which 4-digit codes to enter to set up the Guide Remote™. Notes: • The remote control might not have every command featured on your original remote controls. • A key on the Guide Remote that has the same name may have a slightly different function. • Some codes are very similar and may operate some but not all the desired functions as your original remote.
Manufacturers’ Codes Brand TV Codes BROKSONIC CANDLE CAPEHART CARNIVALE CARVER CCE CELEBRITY CENTURION CETRONIC 0644, 0637, 0926, 0549, 0961, 0600, 0623 0637, 0644, 0611, 0560 0646 0644 0578, 0629, 0570 0579 0682 0644 0600 0576, 0959, 0644, 0637, 0906, 0586, 0611, 0696, 0560, 0600, 0905 0588 0600 0644, 0906 0637, 0644, 0906 0600, 0588 0639, 0959 0623, 0874, 0566, 0720, 0600, 0668 0567 0959, 0600 0720, 0710, 0605, 0644, 0906, 0959, 0586, 0643, 0629, 0642 0600 0873, 0564, 0949, 0696, 0644, 0906, 0868, 0728
Manufacturers’ Codes Brand TV Codes FORTRESS FUJITSU FUNAI FUTURETECH 0716 0584 0713, 0600, 0584 0600 0200, 0704, 0200, 0636, 0626, 0667, 0644, 0566, 0582, 0643, 0645, 0682, 0624, 0607, 0937, 0948, 0960, 0965, 0969, 0547, 0968 1043, 0644, 0906 0686, 0694, 0875, 0628, 0637, 0644, 0906, 0959, 0618 0069, 0592 0600, 0584 0644, 0906, 0584, 0623 0644, 0600, 0584, 0623 0724, 0555, 1072, 0694, 0708, 0644, 0906, 0819, 0581, 0898, 0563, 0959, 0620, 0637, 0599, 0621, 0909, 0967 0600 0629 0611 0629 0636, 0628, 0644,
Manufacturers’ Codes Brand TV Codes LOEWE LOGIK LUXMAN 0629 0710, 0600, 0623 0637, 0644, 0906 0553, 0721, 0642, 0605, 0950, 0567, 0629, 0667, 0643, 0637, 0644, 0906, 0907, 0900 0961, 0716, 0935, 0644, 0906, 0629, 0584, 0696 0725, 0920, 0629, 0694, 0567, 0586, 0644, 0637, 0906, 0578, 0572, 0609, 0612, 0614, 0560 0710, 1043 0629, 0578, 0572, 0644, 0906 0961, 0724, 0644, 0906 0645, 0588 0676, 0907, 0637, 0644, 0906, 0549, 0700, 0618, 0710, 0642 0563, 0700, 0644, 0906 0645, 0643, 1043 0624 0557, 0644, 0637,
Manufacturers’ Codes Brand PHILIPS PILOT PIONEER PORTLAND PRISM PROSCAN PROTON PULSAR QUASAR RADIOSHACK RCA REALISTIC RHAPSODY RUNCO SAMPO SAMSUNG SANSUI SANYO SCIMITSU SCOTCH SCOTT SEARS SHARP SHOGUN SIGNATURE_2000 SIMPSON SONIC Manufacturers’ Codes TV Codes 0567, 0578, 0572, 0629, 0609, 0614, 0682, 0607, 0644, 0906, 0956 0644, 0906 0747, 0727, 0903, 0605, 0626, 0620, 0644, 0906, 0651, 0963, 0964 0693, 0644, 0959, 0906, 0696 0645, 0636 0703, 0550, 0582, 0592, 0643, 0634, 0620, 0608, 0906 0961, 0622, 095
Manufacturers’ Codes Brand SONY SOUNDESIGN SPECTRACON SSS STARLITE SUPRE MACY SUPREME SYLVANIA SYMPHONIC TANDY TATUNG TECHNICS TECHNOL ACE TECHWOOD TEKNIKA TERA THOMSON TIME WARNER TMK TOSHIBA TOSONIC TOTEVISION UNIVERSAL VECTOR RESEARCH VICTOR VIDEO CONCEPTS VIDTECH VIKING WEB TV YAMAHA YORK ZENITH ZONDA 31 TV Codes 0682, 0667, 0644, 0689, 0669, 0598, 0568, 0620, 0565, 0966, 0979, 0980 0600, 0644, 0906, 0560, 0584 0961, 0600, 0637, 0644, 0906 0906, 0644, 0600, 0623 0600, 0906, 0623 0611, 0560 0682 0553,
Manufacturers’ Codes CABLE CODES Brand Codes ABC ALLEGRO ANTRONIX ARCHER BELLSOUTH CABLETENNA CABLEVIEW CENTURY CITIZEN CLEAR MAX COMCAST COMTRONICS COX CTX 0227, 0231, 0239, 0250, 0617, 0995 0243, 0208, 0914 0243 0208, 0259, 0243, 0281, 0990 0883 0259 0259 0208 0208, 0249 0702 0238 0228, 0204 0225, 0238 0208 DIGITAL ENTERTAINMENT 0501 EAGLE COMTRONICS EASTERN ELECTRICORD EMERSON EVERQUEST EXPLORER GARRARD GC ELECTRONICS GE GEMINI GENERAL INSTRUMENT GOLDSTAR HAMILTON HAMLIN/REGAL HARMON KARDON HITACHI
Manufacturers’ Codes Brand HITEX JASCO JERROLD KINGSTON MACOM MAGNAVOX MEDIA ONE MEMOREX MITSUBISHI MOTOROLA MOVIE TIME NOVAPLEX NOVAVISION NSC OAK OMEGA OPTIMUS PANASONIC PARAGON PHILIPS PHILIPS PIONEER Cable Codes 0227 0208 0229, 0231,0195,0196, 0226, 0238,0194,0187, 0248, 0192, 0244, 0250, 0989, 1004 0204, 0208, 0283 256 0991, 1009, 1010, 1003 0238 0797, 0914 1013 0238 0211, 0207,0199 0222, 0919 0224, 0233, 0239 0207,0199, 0992, 1005 993, 0227, 0994, 0997 0226, 0228 504 0197, 0294, 0210, 0914, 0998 0797
Manufacturers’ Codes Brand SKYCABLE SL MARX SONY SPRUCER STD COMPONENTS STARCOM STARGATE STARQUEST STORM SYLVANIA TANDY TEKNIKA TELECAPTION TELEVIEW TEXSCAN TIME WARNER TOCOM TOSHIBA TUSA TV86 U.S.
Manufacturers’ Codes SATELLITE CODES Brand Codes ACCESS 0922 DIGITAL ENTERTAINMENT DIRECTV DISH NETWORK DRAKE ECHOSTAR BROCKWOOD GENERAL INSTRUMENT HUGHES MAGNAVOX MITSUBISHI MONTGOMERY WARD OPTIMUS PANASONIC PHILIPS PRIMESTAR RADIOSHACK RCA SAGEM SAMSUNG SONY TOSHIBA UNIDEN ZENITH 35 0501, 0194, 0506, 0928 0497, 0493, 0849 0502, 0825, 0888, 0890, 0267, 0282, 0297, 0511, 0825, 0895 0932 0502, 0825, 0888, 0890, 0267, 0297, 0511, 0895 0906, 0644 0506, 0194, 0501, 0928, 0913 0497, 0493, 0849 0991, 1009
Manufacturers’ Codes VCR CODES Brand Codes ADMIRAL ADVENTURA AIKO AIWA AKAI ALLEGRO AMERICAN HIGH ASHA AUDIO DYNAMICS AUDIOVOX BEAUMARK BELL AND HOWELL BROOKSONIC CALIX0 CANDLE CANON CAPEHART CARVER CCE CITIZEN COLORTYME COLT CRAIG CURTIS MATHES CYBERNEX DAEWOO DAYTRON DBX DYNATECH ELECTROHOME ELECTROPHONIC 0747, 0768, 0749, 0797, 0764, 0761 0820 0545, 1053, 0868 0834, 0837, 0549, 0820, 0808, 0796, 0546, 0544 0780, 0744, 0847, 0743, 0787, 0762, 0737, 0815 0797 0862, 0771, 0807 0745, 1047 0767, 0823, 1028
Manufacturers’ Codes Brand FUNAI GARRARD GE GO VIDEO GOLDSTAR GRADIENTE GRISWOLD HARLEY DAVIDSON HARMON KARDON HARWOOD HAVARD HEADQUARTER HI-Q HITACHI INSTANT REPLAY INTEQ J.C. PENNEY JCL JENSEN JVC KEC KENWOOD KLH KODAK LINATECH LLOYD LOGIK LXI M.
Manufacturers’ Codes Brand MARTA MASUSHITA MEI MEMOREX MGA MINOLTA MITSUBISHI MTC MULTITECH NAD NEC NECKERMANN NIKKO NIKON NOBLEX OPTIMUS OPTONICA ORION PANASONIC PENTAX PHILCO PHILIPS PILOT PIONEER PRIMESTAR PROSCAN PROTEC PULSAR QUARTER QUARTZ QUASAR RADIOSHACK 38 VCR Codes 0773 0924, 0747, 0819, 0771, 0862 0819, 0862 0755, 0773, 0731, 0833, 0808, 0797, 0819, 0826, 0556, 0747, 0820, 0832, 0855, 0856, 0862, 1058, 1047 0835, 0847, 0846, 0819 0737, 0841 0813, 0784, 0762, 0835, 0847, 1033, 0819, 0821, 0917,
Manufacturers’ Codes Brand RADIX RANDEX RCA REALISTIC RICOH RUNCO SAMSUNG SANSUI SANYO SCHNEIDER SCOTT SEARS SHARP SHINTOM SHOGUN SIGNATURE SINGER SONY STS SYLVANIA SYMPHONIC TANDY TASHIKO TATUNG TEAC TECHNICS TEKNIKA TIME WARNER TIVO TMK TOSHIBA Manufacturers’ Codes VCR Codes 0773 0773 0817, 0893, 0879, 0812, 0809, 0737, 0841, 0547, 0757, 0792, 0767, 0754, 0777, 0751, 0819, 0749, 0837, 0862, 0768, 0931, 0766 0820, 0774, 0773, 0739, 0731, 0745, 0833, 0819, 0826, 0556, 0924, 0747, 0855, 0856 0753, 1036 079
Manufacturers’ Codes Brand TOTEVISION UNITECH VECTOR RESEARCH VICTOR VIDEO CONCEPTS VIDEOSONIC WEBTV WHITE WESTINGHOUSE YAMAHA ZENITH ZONDA 40 VCR Codes 0773, 0745, 1047 0745, 1047 0775, 0740, 0552 0838, 0854 0775, 0740, 0552, 0847, 0854 0745, 1047 0825 0820 0855, 0775, 0740, 0552, 0737, 0848, 0815 0773, 0755, 0753, 1036, 0797, 1043 773 Manufacturers’ Codes
Manufacturers’ Codes DVD CODES Brand AIWA APEX BOSE BROOKSONIC CALIFORNIA AUDIO CARY CONCEPT DAEWOO DENON FISHER FUNI GE GOLDSTAR GOVIDEO HARMON KARDON HITACHI JVC KENWOOD KLH KYOCERA LASONIC M.
Manufacturers’ Codes Brand PROSCAN QUASAR RCA REALISTIC ROWA SAMSUNG SANSUI SANYO SHARP SONY SYLVANIA TEAC TECHNICS THETA DIGITAL THOMPSON TOSHIBA YAMAHA ZENITH Manufacturers’ Codes DVD Codes 0450, 441 0445 0894, 0878, 0450, 0441, 0440, 0477, 0472, 0478 0474 0490 0464, 0447, 1016 0456 0476, 0436, 0827 0480, 0491, 0986 0443, 1018, 0469, 1015, 0464, 0827 0487 0438, 0871, 0872, 0882 0445, 0483, 0479, 1020 0435, 0870 0441, 0450 0456, 0925, 0451, 0477, 0472, 0478, 0480, 892 0462, 0473, 0471, 0439, 0452, 0481,
Manufacturers’ Codes PVR CODES Brand TIVO HUGHES / TIVO PHILLIPS / TIVO SONY / TIVO SONY SATELLITE/TIVO REPLAYTV PRIDYWAVE Codes 0850 0849 0844 0759, 0776 0776 0782, 0807 0836 VIDEO ON DEMAND CODES Brand SONY DIGITAL BELL SOUTH TIME WARNER Codes 0234 0883 0225 DVD/VCR COMBO CODES Brand SYLVANIA SYMPHONIC SAMSUNG Codes 0820, 0487 0820, 0487 0446 VOL+ = DVD, VOL-= VCR MISCELLANEOUS CODES Brand SHARP PROJECTOR SONY PROJECTOR X10 WEB TV 43 Codes 0662 0663 1063 0825 Manufacturers’ Codes
Troubleshooting TROUBLESHOOTING The Display is blank • Make sure fresh batteries are properly installed. Devices do not respond to commands • Make sure the remote is in the correct mode. • The battery power may be too low. Replace all old batteries with new ones. • The remote may not be pointed in the direction of the device. Point the remote directly at the desired device. • The device may be too far away from the remote. Move to within 30 feet of the device.
FAQ’S FREQUENTLY ASKED QUESTIONS Why are the program titles and descriptions old in my remote? • The Guide Remote* stores up to seven days of TV Listings. If you have not downloaded the listings in more than seven days expired program titles and listings will appear in your remote. Updated program titles will appear again in your remote after you sync your remote. Why can I not get a full seven-day Guide in my remote? • Some digital cable and satellite systems have hundreds of channels.
FAQ’S How do I update my email address? • On the Web site, log into the Members section. • Click on Settings. • In Settings, click on Change next to Login Information. • Enter your new User Name (email address) and click Update. • We will automatically send you an email at your new address. Go to your email and click on the link inside the email to finalize the change.
Specifications SPECIFICATIONS Display Screen ............................................. 2.1 in x 0.7 in (53 mm x 18 mm) Power .................................................…....... (4) AA Batteries Dimensions (HWD) ........................................ 2.8 in x 8.1 in x 1.4 in (71 mm x 206 mm x 36 mm) Weight (Without Batteries) ......................….. 6 oz (170 g) USB Cable ......................................………… 6 ft (1.8 m) Operating Temperature ……….
Warranty Limited Ninety-Day Warranty RadioShack warrants this product against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers.