RadioShack_Kameleon_v3b.qxd 4/10/03 3:21 PM Page 1 CAT. NO 15-2133 OWNER’S MANUAL Please read before using this equipment.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:21 PM Page 2 6-IN-ONE TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Quick Start Guide . . . . . . . . . . . . . . . . . . . . . . . . . .5 Installing Batteries . . . . . . . . . . . . . . . . . . . . . .5 Brightness Adjustment of the Kameleon Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 About the Keypad . . . . . . . . . . . . . . . . . . . . .6-9 Setting Up the Remote . . . . . . . . . . . . . .
RadioShack_Kameleon_v3b.qxd 4/10/03 3:21 PM Page 3 USER’S GUIDE SETUP CODES FOR AUDIO AMPLIFIERS (CÓDIGOS DE CONFIGURACIÓN PARA AMPLIFICADORES DE AUDIO) . . . . . . . . . . . . .46 SETUP CODES FOR AUDIO RECEIVERS (CÓDIGOS DE CONFIGURACIÓN PARA RECEPTORES DE AUDIO) . . . . . . . . . . . . . . .46-48 SETUP CODES FOR CABLE CONVERTERS (CÓDIGOS DE CONFIGURACIÓN PARA CONVERTIDORES DE CABLE) . . . . . . . . . . . . .48 SETUP CODES FOR CD PLAYERS (CÓDIGOS DE CONFIGURACIÓN PARA REPRODUCTORES DE CDS) . . . . . . . .
RadioShack_Kameleon_v3b.qxd 4/10/03 3:21 PM Page 4 6-IN-ONE INTRODUCTION Thank you for purchasing a RadioShack 6-in-One Remote powered by Kameleon™.Your remote is the next generation in remote control technology. It only displays the active keys for each device, so each screen is simple and unique. This easy to use display interface also features animated icons to identify the selected device.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:21 PM Page 5 USER’S GUIDE QUICK START GUIDE Para instrucciones en espanol, vea la pagina 14. INSTALLING BATTERIES Your remote requires four AAA batteries (not supplied) for power. Batteries are available at your local RadioShack store or online at www.radioshack.com. BATTERY NOTES • DISPOSE OF OLD BATTERIES PROMPTLY AND PROPERLY. • DO NOT BURN OR BURY BATTERIES. • USE ONLY FRESH BATTERIES OF THE REQUIRED SIZE AND RECOMMENDED TYPE.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:21 PM Page 6 6-IN-ONE QUICK START GUIDE (CONTINUED) ABOUT THE KEYPAD 1. Kameleon panel This remote is powered by Kameleon, a unique backlit display that combines the functionality of a traditional remote with the power of a touchscreen. It only displays the active keys for each device mode. Each mode has a main screen and menu screen. Press MENU to access the menu screen for the selected mode.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 7 USER’S GUIDE 7. Digit keys The digit (1 – 9, 0) keys control the same function as on your original remote. In AUD mode, the digit keys provide direct input selection. 8. +100 Use +100 on some devices to enter channels over 100 (e.g., for channel 131, press +100, then 3, and then 1). 9. ENTER Press ENTER once after entering the channel numbers on some TVs, VCRs, Cable and Satellite devices.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 8 6-IN-ONE QUICK START GUIDE (CONTINUED) 19. SELECT [ ] Press SELECT to choose options from your selected device’s menu or guide. 20. Directional keys Use the directional keys to move the cursor in the program guide and menu screens. If your stereo does not have a menu, these keys allow you to adjust the volume of your rear speakers +( ) or – ( ) and to adjust the balance left ( ) and right ( ). 21.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 9 USER’S GUIDE 27. SUR SND / SLEEP [ ] When in AUD mode, SUR SND is illuminated to allow you to access Surround Sound functionality on your audio device. When in TV, VCR, SAT, and CBL modes, SLEEP is illuminated to allow you to access Sleep functionality on devices that have a built-in Sleep timer. These keys operate the same function as they did on your original remote control. 28.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 10 6-IN-ONE QUICK START GUIDE (CONTINUED) SETTING UP THE REMOTE The remote is preprogrammed at the factory to operate an RCA TV, VCR, DVD and satellite receiver, and Pioneer CD and audio devices. To control devices other than the default brands, perform the following steps and repeat them as needed for each device to be programmed; otherwise skip this section. Direct code set up TO SET UP THE REMOTE FOR YOUR TELEVISION: 1.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 11 USER’S GUIDE ASSIGNED TO A DEVICE KEY. IF YOUR ORIGINAL REMOTE OPERATES MORE THAN ONE DEVICE (FOR EXAMPLE, A RECEIVER, CD PLAYER, AND CASSETTE PLAYER IN ONE REMOTE), YOU NEED TO SET UP EACH DEVICE SEPARATELY. • WRITE YOUR CODE IN THE BOXES PROVIDED ON PAGE 26, FOR QUICK, EASY REFERENCE.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 12 6-IN-ONE QUICK START GUIDE (CONTINUED) • IF YOUR DEVICE DOES NOT RESPOND, FOLLOW STEPS 1 THROUGH 6 WITH EACH CODE LISTED FOR YOUR BRAND. IF NONE OF THE CODES LISTED FOR YOUR BRAND OPERATE YOUR DEVICE, THEN TRY “SEARCH METHOD” ON PAGE 12. • SOME CODES ARE QUITE SIMILAR. IF YOUR DEVICE DOES NOT RESPOND OR IS NOT FUNCTIONING PROPERLY WITH ONE OF THE CODES, TRY ANOTHER CODE LISTED UNDER YOUR BRAND.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 13 USER’S GUIDE • IF YOU CANNOT CONTROL YOUR TELEVISION PROPERLY, PLEASE CONTINUE THE SEARCH METHOD AS YOU MAY BE USING THE WRONG CODE. • DURING STEP 5, IT IS ALSO POSSIBLE TO SEND ANOTHER SIGNAL INSTEAD OF THE POWER SIGNAL. SIMPLY PRESS ANY OF THE FOLLOWING KEYS DURING STEP 5 INSTEAD OF THE POWER KEY: 0, 1, 2, 3, CH+, VOL+, PLAY OR STOP.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 14 6-IN-ONE INTRODUCCIÓN Gracias por comprar un control remoto “Radioshack 6-in-one” potenciado por Kameleon. Este dispositivo que acaba de adquirir representa la última generación en tecnología de controles remotos. Sólo muestra en pantalla las teclas activas para cada dispositivo, por lo que cada pantalla resulta simple para el usuario y única para cada dispositivo.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 15 USER’S GUIDE Para controlar otras marcas y dispositivos, favor de llevar a cabo las instrucciones de la página 14 en Configuración del 6-en-Uno. GUÍA DE INICIO RÁPIDO INSTALACIÓN DE BATERÍAS Su control remoto necesita cuatro baterías AAA (no incluidas) para el suministro de energía. Para un mejor rendimiento y mayor duración, recomendamos las baterías alcalinas RadioShack. NOTAS SOBRE LA BATERÍA: • Deshágase de las baterías viejas de manera apropiada.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 16 6-IN-ONE GUÍA DE INICIO RÁPIDO AJUSTE DEL BRILLO DE LA PANTALLA KAMELEON Para aumentar o disminuir el brillo de la pantalla Kameleon de su 6-en-Uno. 1. Presione y mantenga presionada la tecla P al menos 3 segundos. La parte inferior del indicador IR parpadeará dos veces, y aparecerá un círculo alrededor de la tecla P. 2. Presione 9 7 4. 3. Para aumentar el brillo, presione CH+. Para disminuir el brillo, presione CH-. 4.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 17 USER’S GUIDE 4. P [ ] Use P para todas las secuencias de programación. Cuando presiona y mantiene presionada la tecla P por al menos durante 3 segundos, la parte inferior del IR Indicator parpadeará dos veces, y aparecerá un círculo alrededor de la tecla P para indicarle que está en la modalidad de programación. 5.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 18 6-IN-ONE GUÍA DE INICIO RÁPIDO 14. CH / SKIP (+/-) Estas teclas controlan las mismas funciones que en su control remoto original. En los modos DVD y CD, funcionan como las teclas SKIP +/-. 15. MENU [ ] La tecla MENU controla la misma función que su control remoto original. 16. GUIDE [ ] Use GUIDE para mostrar el programa, la guía o el menú de configuración para el aparato seleccionado. 17.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 19 USER’S GUIDE 23. PIP / [ ] Use PIP para activar y desactivar la característica de Picture-in-Picture (sólo si su TV cuenta con esta funcionalidad). La tecla [ ] Instant Replay (reproducción instantánea) realiza la misma función que en su control remoto original TiVo o Replay. 24. MOVE / [ ] Use MOVE para colocar la imagen de la ventana (si está disponible) en diferentes posiciones dentro de la imagen principal.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 20 6-IN-ONE GUÍA DE INICIO RÁPIDO CONFIGURACIÓN DEL 6-EN-UNO El control remoto viene preprogramado para operar un aparato RCA TV, VCR, DVD, un receptor de satélite y aparatos de audio y CD Pioneer. Para controlar otros aparatos que no se ajustan a las marcas por defecto, siga estos pasos y repítalos tanto como sea necesario para cada aparato que quiera programar. Si no es su caso, ignore esta sección.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 21 USER’S GUIDE • RECUERDE PRESIONAR LA TECLA DEL APARATO CORRECTO ANTES DE OPERAR EL APARATO. SÓLO SE PUEDE ASIGNAR UN APARATO (CD, AMPLIFICADOR, CABLE, ETC.) A CADA TECLA DE APARATO. SI SU CONTROL REMOTO ORIGINAL OPERABA MÁS DE UN APARATO (POR EJEMPLO, UN RECEPTOR, UN REPRODUCTOR DE CD Y UNA REPRODUCTOR DE CASSETTE EN UN MISMO CONTROL REMOTO), NECESITARÁ CONFIGURAR CADA APARATO POR SEPARADO.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 22 6-IN-ONE GUÍA DE INICIO RÁPIDO 5. Enseguida, presione POWER. Si la TV se apaga, significa que ha encontrado su código. Si no se apaga, presione la tecla TV para pasar al siguiente código, entonces presione POWER de nuevo. Repita este proceso hasta que encuentre el código que apague su TV. Quizás tenga que repetir esta secuencia varias veces, así que sea paciente. Recuerde mantener su 6-en-Uno apuntando a su televisión mientras presiona estas teclas. 6.
RadioShack_Kameleon_v3b.
RadioShack_Kameleon_v3b.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 25 USER’S GUIDE CABLE/SAT VIDEO ACC.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 26 6-IN-ONE CODE VERIFICATION If you have set up your remote via the Search Method, you can “blink” back your code for future reference. Please notice that the bottom part of the IR Indicator will indicate the 4 digits by blinking the number of times to represent each digit. TO BLINK BACK YOUR TELEVISION CODE: 1. Press TV on your remote. 2. Hold down P for at least 3 seconds. The bottom of the IR Indicator blinks twice, and a circle appears around P. 3.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 27 USER’S GUIDE VOLUME LOCK In its default (unlocked) state, the remote allows each device to control its own volume only in its own mode (e.g., TV volume in the TV mode, VCR volume in VCR mode, etc.). However, using your remote’s Volume Lock feature, you can adjust the volume for a certain device (e.g., TV) while in a different mode (e.g., VCR).
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 28 6-IN-ONE VOLUME LOCK (CONTINUED) To cancel the volume lock across all modes 1. Hold down P for at least 3 seconds. The bottom of the IR Indicator blinks twice, and a circle appears around P. 2. Press 9 9 3. The bottom of the IR Indicator blinks twice. 3. Then press the VOL (+) key and the bottom part of the IR Indicator blinks four times. Now in all modes, the VOL+, VOL- and MUTE keys operate the original function again.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 29 USER’S GUIDE FAVORITE CHANNEL SCAN In the TV, VCR, DVD, SAT, or CBL mode, the remote can store up to 10 favorite channels, in any order, that immediately scan when you press FAV SCAN once (see Using Channel Scan on the next page). NOTE: ONLY CHANNELS OF ONE MODE CAN BE STORED AND ANY PREVIOUSLY STORED CHANNELS WILL BE CLEARED. TO SET UP FAVORITE CHANNEL SCAN FOR YOUR TV 1. Press TV on your remote. 2. Hold down P for at least 3 seconds.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 30 6-IN-ONE USING CHANNEL SCAN In the VCR, CBL, SAT, TV, and DVD modes, use the FAV SCAN key to start a 3-second scan of all channels for the selected mode, or your favorite channels (if programmed – see Favorite Channel Scan on the previous page). Once Favorite Channel Scan has been set up under a mode, pressing the FAV SCAN key will only cycle through your favorite channel list in that mode. 1. If Favorite Channel Scan has been set up, skip to step 2.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 31 USER’S GUIDE THE LEARNING FEATURE The remote comes with a complete library of preprogrammed codes. After you have set up the remote for your device, you may find that there are one or more keys that you had on the original remote control, which do not have a place on your remote’s keypad. The remote includes a Learning Feature so you can add functions that are unique to your home entertainment devices (e.g., VCR Tracking Up or Down).
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 32 6-IN-ONE THE LEARNING FEATURE (CONTINUED) 2. Hold down P on your remote for at least 3 seconds. The bottom of the IR Indicator blinks twice, and a circle appears around P. 3. Press 9 7 5 on your remote. The bottom part of the IR Indicator blinks twice. 4. Press the device key on the remote to select the mode to which you want to copy the learned function (Example: TV key). 5.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 33 USER’S GUIDE TO DELETE A LEARNED FUNCTION To delete a single learned function key, follow the steps below. 1. Hold down P for at least 3 seconds. The bottom of the IR Indicator blinks twice, and a circle appears around P. 2. Press 9 7 6. The bottom part of the IR Indicator blinks twice. 3. Press the mode key (TV, VCR, etc.) that contains the key you wish to delete. 4. Press the key that holds the function you wish to delete (M1, M2, etc.). 5.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 34 6-IN-ONE USING MACROS MACROS You can program your remote to issue a sequence of commands at the press of one button. For example, you may want to turn off your TV, VCR, and Satellite at the same time. Any sequence of commands you regularly use can be reduced to one key press for your convenience. A key that is programmed with a Macro works through all modes (provided its available in that mode).
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 35 USER’S GUIDE TO ERASE A MACRO • To erase the Macro from M4, press: * 995 * (*) HOLD DOWN P FOR AT LEAST 3 SECONDS. THE BOTTOM OF THE IR INDICATOR BLINKS TWICE, AND A CIRCLE APPEARS AROUND P.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 36 6-IN-ONE REASSIGNING MODE KEYS Although you have six mode keys (TV, VCR, etc.), the remote can be set up to control a second TV, VCR, DVD player, or other device not listed on the device keys. The code for this device can be set up using Direct Code Set Up (p. 10) or Search Method (p. 12). To reassign a mode key, please follow the two examples below. THE DEVICE KEY ANIMATION LOOKS THE SAME WHEN THE MODE CHANGES.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 37 USER’S GUIDE RESETTING A DEVICE KEY EXAMPLE: TO RESET DVD TO ITS ORIGINAL MODE, PRESS: * ** 992 (*) HOLD DOWN P FOR AT LEAST 3 SECONDS. THE BOTTOM OF THE IR INDICATOR BLINKS TWICE, AND A CIRCLE APPEARS AROUND P. (**) THE BOTTOM PART OF THE IR INDICATOR BLINKS TWICE.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 38 6-IN-ONE UPGRADING YOUR REMOTE Your remote contains a unique feature that allows new codes to be added to its memory over the phone. In a matter of seconds, your remote quickly and reliably records the new information without complex plugs, adapters, or attachments. This means that as you buy new products the remote will never become obsolete.
RadioShack_Kameleon_v3b.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 40 6-IN-ONE TROUBLESHOOTING Problem My brand is not listed on the Manufacturer’s Code list. The remote does not operate my device(s). I cannot find a working code using the instructions in “Search Method”. The remote is not performing commands properly. The remote does not change channels correctly. CH+, CH-, and LAST do not work on my RCA TV. VCR does not record. The remote does not respond after pressing a key.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 41 USER’S GUIDE Solution Try the “Search Method” on page 12. 1. Try all the codes listed for your brand. 2. Try the “Search Method” on page 12. See our website (www.radioshack.com) for help or take your remote to your local RadioShack store. You may be using the wrong code. Try repeating the “Direct Code Set Up” procedure (page 10) using another code listed for your brand, or start the “Search Method” (page 12) over again to locate the proper code.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 42 6-IN-ONE SPECIFICATIONS Remote Control Power 4 AAA Batteries Remote Control Dimensions (H x W x D) 9.38 x 2.79 x 0.69 in. (H x W x D) 238.3 x 70.8 x 6.9 mm Remote Control Weight (without Batteries) 0.36 lb (160 g) NOTE: SPECIFICATIONS ARE TYPICAL. INDIVIDUAL UNITS MIGHT VARY. SPECIFICATIONS ARE SUBJECT TO CHANGE AND IMPROVEMENT WITHOUT NOTICE.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 43 USER’S GUIDE CARE Keep the remote dry; if it gets wet, wipe it dry immediately. Use and store the remote only in normal temperature environments. Handle the remote carefully; do not drop it. Keep the remote away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new. If your remote is not performing as it should, take it to your local RadioShack store for assistance.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 44 6-IN-ONE LIMITED 90-DAY WARRANTY This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from RadioShack companyowned stores and authorized RadioShack franchisees and dealers.
RadioShack_Kameleon_v3b.
RadioShack_Kameleon_v3b.
RadioShack_Kameleon_v3b.
RadioShack_Kameleon_v3b.
RadioShack_Kameleon_v3b.
RadioShack_Kameleon_v3b.
RadioShack_Kameleon_v3b.
RadioShack_Kameleon_v3b.
RadioShack_Kameleon_v3b.
RadioShack_Kameleon_v3b.
RadioShack_Kameleon_v3b.
RadioShack_Kameleon_v3b.
RadioShack_Kameleon_v3b.
RadioShack_Kameleon_v3b.
RadioShack_Kameleon_v3b.
RadioShack_Kameleon_v3b.
6in1_manual.qxd 12/16/02 8:41 AM USER’S GUIDE This product uses technologies licensed under one or more of the following U.S.
RadioShack_Kameleon_v3b.