- RadioShack Universal Remote User Manual

Quick Start Guide 13
USER
’S GUIDE
• IFYOU CANNOT CONTROL YOUR TELEVISION PROPERLY, PLEASE CONTINUE
THE SEARCH METHOD AS YOU MAYBEUSINGTHEWRONGCODE.
• D
URING STEP 5, IT IS ALSO POSSIBLE TO SEND ANOTHER SIGNAL INSTEAD
OF THE POWER SIGNAL
.SIMPLY PRESS ANY OF THE FOLLOWING KEYS
DURING STEP
5 INSTEAD OF THE POWER KEY: 0, 1, 2, 3, CH+,
VOL+, PLAY OR STOP.IF, FOR EXAMPLE, DURING STEP 5 YOUPRESS
“2”INSTEAD OF “POWER”,THE REMOTE WILL SEND THE “NUMBER 2”
SIGNAL
(MAKE SURE YOUR
TV IS SWITCHED TO A CHANNEL OTHER THAN
2).
• IFNOKEY IS PRESSED WITHIN
30 SECONDS DURING STEP 5, THE REMOTE
EXITS THE SET UP MODE AND RETURNS TO THE CODE PREVIOUSLY SET UP
BEFORE STARTING THIS PROCESS
.
• T
OSEARCH FOR YOUR OTHER DEVICES
, FOLLOW THE SAME INSTRUCTIONS
ABOVE
, ONLY P RESS THE APPROPRIATE DEVICE KEY DURING STEP 2 AND
5.
• IFYOUR
VCR’SORIGINAL REMOTE CONTROL DOES NOT HAVE A
POWER
KEY
, PRESS
PLAY INSTEAD OF POWER DURING STEP
5.
Congratulations! You should now have your
remote set up to operate your home entertain-
ment components. For instructions on how to
operate advanced features of your remote, like
Favorite Channel Scan,Volume Lock, and Macros,
see page 27.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 13