User's Manual

6
Setup
3. Onyouruniversalremote,pressandholdSET, and then press a device key (TV,
VCR/DVD, SAT/CBL, AUX). The device key lights up and stays lit, indicating that
the remote is in setup mode. Release both buttons.
n Note:Donotholddownthekeysforlongerthan3secondsortheremoteenters
autosearchmode.
4. Enter the first 3-digit code for your device and brand. Pause briefly between each
digit to make sure the remote receives all inputs. The device key flashes when input
is received, then turns off if you entered the right code. If the device key stays lit,
enter the next code for your device and brand. Repeat for all possible codes until
the device light turns off.
5.
Verify the setup by testing the remote control’s buttons and functions. If some of
your device’s functions do not respond to the remote, repeat step 4 with another
code.
n Notes:
• Touseadifferenttypeofdevicethanwhatislabeledonthedevicekey,followthe
“Copying Device Codes”stepsonpage11.
• Ifyouwanttoquitduringdevicesetup,pressthedevicekeyorwait10secondsfor
theremotetoexitsetupautomatically.
• Ifyouareuncertainaboutyour3-digitcodeentry,follow“Check Current Brand Code”
onpage9toconrmyourcode.