Owner`s manual

17
Freezes the measured signal on the oscillo-
scope display (Ctrl-l)
Switches between seconds and Hertz for
the measured signal (Ctrl-U)
Note: You can use this mode only when the
vertical cursors appear on the oscilloscope
display.
Calls up the print dialog menu (Ctrl-P)
Turns on and off the Digital Voltmeter
(DVM) function (Ctrl-D)
Freezes the displayed DVM measured val-
ue (Ctrl-A)
Note: You can use this mode only when the
DVM
function is selected.
Provides information about ProbeScope
Opens the help files (Shift+F1)
HOLD
Hz
SEC
HOLD
0.12
H
?
?
22-310.fm Page 17 Friday, August 6, 1999 12:26 PM