User`s guide

6
The Basics
7
The Basics
rear view
XLR Balanced
Microphone Inputs
Connect up to four high-
impedance microphones to
your amplifi er.
Cooling Fan
Automatically activated whenever
the amplifi er is turned on. This
forced air cooling system rapidly
exhausts interior heat to reduce
operating temperature.
¼” Stereo Input Jacks
Connect stereo input
sources (CD or DVD player,
TV, etc.) here, via a ¼
(balanced) audio cable.
Fuse
Ground Wire
Connection
Phono Input
Jacks
Connect your
turntable here.
MIX BUS Jack
Connect an extra
amplifi er if you have
multiple audio sources.
CD/AUX Jack
Connect any high-level
sound source for music
or special effects.
EQ/BYPASS Selector
Select EQ if you are using
an equalizer or BYPASS
if you are using another
external processor.
STEREO/MONO Selector
Select bridged mono input
mode in combination with
a mono signal source
plugged into the left
channel.
Speaker Terminals
Connect two sets of
speakers (Left and
Right, for A and B).
Audio Input Jacks
Connect input sources (CD
or DVD player, TV, etc.) here,
via an unbalanced audio
cable. Match the colors on
your cable connections with
the colors on the jacks.
MIC 4/PHONO Switch
Select MIC 4 or
PHONO input.
¼” Unbalanced
Microphone Inputs
Connect up to four microphones to
your amplifi er, via a ¼” unbalanced
cable, for left and right mono sound.
EQ IN/OUT Jacks
Connect an equalizer
or other external
processor.