User`s guide

Please read this user’s guide before
installing, setting up and using your new product
www.radioshack.com
Thank you for purchasing your Home
Automation Mini Controller from RadioShack. It
lets you remotely control lights and appliances
from anywhere in your home. You can turn
off your child’s night light or the television
downstairs without getting out of bed at night.
Your Mini Controller can turn on all connected
lights and appliances on up to 8 modules with
the push of a button. And, you can turn off
everything in the system with one button to
conserve energy. You also can dim and brighten
lights with your Mini Controller.
61-3001
home automation
mini controller
To install your Mini Controller,
plug the power cord into any
functioning wall outlet.
Set the sliding switch to the
modules you want it to control
(1-4 or 5-8).
Using a small screwdriver, choose
one of the 16 letters on the Mini
Controller’s House Code dial. Set
all modules to be controlled by
your Mini Controller to the same
House Code.
Caution
Be very careful when you use your
Mini Controller. Do not use it with
an unattended coffee pot or heater.
Switching on an unattended coffee
pot or heater can cause a serious
re hazard.
To turn on/off lights or
appliances:
Press and release the On or Off
button that corresponds to the Unit
Code of the module to be controlled.
To turn on all lights connected
to your Lamp or Wall Switch
Modules:
Press and release the On button for All
Lights On.
To turn off all lamps or appliances
connected to any module:
Press and release the Off button for
All Units Off.
To Dim or Brighten Lights
Press and release the On key for
the lamp you want to control. Then,
press the top or bottom of the switch
to brighten or dim the lights. Hold it
down until you reach the desired level
of brightness.

Summary of content (2 pages)