- RadioShack 900 MHz Cordless Telephone Caller ID/Call Waiting ID Owner's Manual

Memory Dialing
20
STEPS FOR ENTERING NAMES
AND SPECIAL CHARACTERS
Refer to the letters on the number keys to select
the desired characters.
With each press of a numeric key, the displayed
character appears in the following order: Upper
case letters first, lower case letters next and
finally the number corresponding to the key.
For example, to enter Movies.
1. Pick up the handset. Press
MEM.
2. Enter a number or press
RING/VOL/+ or RING/
VOL/-
to select a memory location.
3. Press
SELECT.
4. Press
SELECT. (When there is information
already stored in the selected memory
location, ¨
Edit Memory X¨ is displayed. See
page 22 for information on “Editing a Stored
Name and/or Phone Number”.)
5. Press 6. Then press
#/ to move the cursor
to the right.
Ô
6. Press 6 six times.
7. Press 8 six times.
8. Press 4 six times.
9. Press 3 five times.
10. Press 7 eight times.
11. When finished, press
SELECT.
Ô NOTE Ô
If the next character uses
the same number key, you
must press #/ to move
the cursor over. Otherwise
the next time you press the
number key, it changes the
character that was
previously set.