- RadioShack 900MHz Cordless Phone with Caller ID and Digital Answering System Owner's Manual

Memory Dialing
18
Upper case letters first, lower case letters next, and
finally the number corresponding to the key.
If You Make a Mistake while Entering
a Name
Use ∗/TONE/& or #/% to move the cursor to the
incorrect character, press
CH/DEL to erase up to the
wrong entry, then enter the correct character. To
delete all characters, press and hold
CH/DEL.
For example, to enter John; Ô
1. Pick up the handset. Press and hold
MEM.
2. Enter a number or press # or $, to select a
memory location number.
3. Press
SEL.
4. Press
5 once.
5. Press
6 six times.
6. Press 4 five times.
7. Press
6 five times.
8. When finished, press
SEL.
To continue to store the telephone number, proceed
to step 6 on page 17.
Ô NOTE Ô
If the next character uses
the same number key, you
must press #/% to move the
cursor over. Otherwise the
next time you press the
number key, it changes the
character that was
previously set.
43-3827/3870.FM Page 18 Monday, June 2, 2003 11:02 AM