Owner's Manual 5.8 GHz Multi-Handset Expandable Cordless Telephone with Digital Answerer

Setting Menu Options
24
2. Once you have recorded a personal
greeting, press the
CHANGE soft key to
choose the greeting. The selected
outgoing message is played. Each time
you press the
CHANGE soft key, the
phone switches the outgoing message
between the prerecorded and the
personal outgoing message.
Setting a PIN Code
Security code selects a two-digit Personal
Identification Number (PIN) code. A PIN
code is required to play your messages
from a remote location.
1. Press the
MENU soft key. Select the
Answ. Setup menu, and then the
Security Code submenu.
2. Enter a two-digit PIN code (01-99)
using the number keypad (
0-9).
3. Press the OK soft key. You will hear a
confirmation tone.
Setting the Ring Time
Ring Time allows you to set the number of
rings the caller hears before your answering
system plays the outgoing message. You
can set the ring time to answer after two,
four, or six rings. If you enable the Toll
Saver (TS), the answering system picks up
after two rings if you have new messages
and after four rings if there are none.
1. Press the
MENU soft key. Select the
Answ. Setup menu, and then the Ring
Time submenu.
2. Press VOL/RING/ or VOL/RING/ to
select a Ring Time (
Toll Saver
,
2 Times
,
4 Times
, or
6 Times
).
3. Press the
OK soft key. You will hear a
confirmation tone.