Owner`s manual

Need help? Call 1-800-763-9232
20
Note:
If the 4-digit code begins with
zero, only the last 3-digits appear.
6. Point the 7-in-One at your CD Player
and press
PLAY
. Your CD player should
start to play. If it does not, enter the next
code from the list and press
SELECT
then
PLAY
again. When your CD starts
to play, press
ESCAPE
to stop program-
ming.
TO OPERATE YOUR TUNER/
RECEIVER
Locate the codes for your Tuner/Receiver in
“Tuners/Receivers” on Page 60 and write
them down on the supplied label.
Note:
Some manufacturers have several
codes listed. Try each until you find the right
one. The brands are listed in alphabetical or-
der, with the most popular codes listed first.
Then follow these steps to program the 7-in-
One to operate your Tuner/Receiver.
1. Turn on your Tuner/Receiver.
2. Press
TUNER
then hold down
P
until
TIMED SEQ
appears.
3. Press .
CODE SETUP
appears.
4. Repeatedly press
SELECT
until
TUNER
appears.
5. Enter the first four-digit code listed for
you tuners/receiver’s brand, then press
SELECT
.
Note:
If the 4-digit code begins with
zero, only the last 3-digits will appear on
the display.
15-1995.fm Page 20 Thursday, March 2, 2000 7:40 AM