Owner`s manual

Need help? Call 1-800-763-9232
28
2. Press to add time to the sleep timer.
Each press will add 15 minutes up to a
total of 60 minutes.
3. Press
SELECT
after the desired time is
displayed.
If you would like to use the 7-in-One’s built in
sleep timer on all of your devices, you can
lock the sleep mode.
1. Hold down
P
until
TIMED SEQ
appears.
2. Press twice.
CONFIGURE
appears.
3. Press
SELECT
.
THEATR SEL
appears.
4. Press twice.
SLEEP LOCK
appears.
5. Press
SELECT
.
DISABLE
appears.
6. Press .
ENABLE
appears.
7. Press
SELECT
. Now, whenever you
press
SLEEP
(
SHIFT
+
MUTE
), the 7-In-
One will use its own built-in timer.
Notes:
• When using the built-in sleep timer,
pressing
POWER
will cancel the sleep
function.
• Once you have activated the 7-in-One’s
built in sleep timer, you must keep the
remote control aimed directly at the
component.
To use another device’s sleep timer, or to
simply disable the Sleep Lock, repeat the
above steps, pressing to select
DISABLE
in Step 6.
15-1995.fm Page 28 Thursday, March 2, 2000 7:40 AM