TM THE PERFORMANCE YOU NEED 100W 2-Way In-wall Speaker Please read this user’s guide before using your new speaker. User’s Guide 40-290 © 2009. Ignition L. P. All rights reserved. Auvio is a trademark used by Ignition L.P. Package and insert are recyclable. Insert contains recycled material.
Package Contents In-wall Speaker User’s Guide Template / Paint Mask Quick Start Features Mount your speaker flush with the ceiling or wall with the wing-type mounting system. The frame and grille can be painted to match the room’s decor. The tweeter can be tilted to direct the sound to best suit the room’s acoustics. 1 Installation Prepare the location To mount your speaker, you need the following items (not supplied).
1. Remove the inner cardboard disc from the supplied template/paint mask and keep it for later. Use the outer portion of the mask as a template to mark the cutout hole size and location for mounting the speaker. 2. Use a drywall or keyhole saw to cut the hole. Template 2 Connect to your amplifier 1. Route the speaker wire from your amplifier to the speaker. Avoid routing near existing electrical wires and do not nail or staple the wire. 2. Separate about 4 inches (100 mm) of wire at each end.
3 Mount the speaker 1. Remove the grille to expose the mounting screws. 2. Be sure the mounting tabs are turned in, allowing the speaker to fit into the hole. Then insert the speaker into the mounting hole. Mounting Tab 3. Tighten the six screws to secure the mounting tabs to the wall or ceiling. Be careful not to overtighten the screws. 4. Replace the grille. n Note: To remove the speaker from the wall or ceiling, loosen the screws only far enough to remove the speaker.
Painting the speaker (optional) Before you connect the speaker wire or mount the speaker, you can paint the frame and grille. 1. To remove the grille, insert a paper clip into one of the grille openings, then pull up. 2. Before you paint the grill, carefully remove the dust cloth. Frame Grille 3. Before you paint the frame, insert the supplied cardboard paint mask to prevent paint from entering the speaker. 4.
This warranty does not cover: (a) damage or failure caused by or attributable to abuse, misuse, failure to follow instructions, improper installation or maintenance, alteration, accident, Acts of God (such as floods or lightning), or excess voltage or current; (b) improper or incorrectly performed repairs by persons who are not a Ignition L.P.
Protect the environment by recycling used electronics. Go to E-CyclingCentral.com to find an electronic recycling center near you. Get more from your audio and video equipment. See what you’ve been missing. With Auvio, you control the experience. Auvio was established by a group of technophiles to provide high quality audio and video products without the high sticker price. The Auvio philosophy is for you to experience audio and video as it was intended to be: pure and distortion free.
