Owner`s manual

12
Notes:
• As the distance between the transmitter and receiver
increases, the hissing background noise also increases.
Move closer to the transmitter to eliminate the noise.
• Range varies depending on obstructions, such as the
number of walls between the transmitter and receiver
and the location of furniture and appliances.
6.
To turn off the receiver , slide
OFF ON
to
OFF
, and the
POWER indicator turns off.
7. To turn off the transmitter , slide
POWER
to the left. The indi-
cator turns off.
SETTING THE CHANNEL SWITCH
The default setting for
CHANNEL
on both the transmitter and re-
ceiver is
A
. If there is too much interference, set
CHANNEL
on
both the transmitter (located to the left of
POWER
) and the re-
ceiver (located on the right side below
VOLUME
) to
B
. The red
indicator appears next to
CHANNEL A
or
B
on the transmitter to
indicate the current operating channel.
Note:
The transmitter and receiver must be set to the same
channel for the system to operate.
43-494.fm Page 12 Thursday, June 3, 1999 9:10 AM