Owner`s manual

1. Insert the supplied AC adapter's barrel plug into the trans-

mitter's

DC9V

jack.

Caution:

You must use a Class 2 power source that

supplies 9 volts DC and delivers at least 100 mA. Its

center tip must be set to positive and its plug must fit

the monitor's

DC9V

jack. The supplied adapter meets these

specifications. Using an adapter that does not meet these spec-

ifications could damage the monitor or the adapter.

2. Plug the adapter's AC plug into a standard AC outlet.

Unplug the adapter if you will not use the transmitter for an ex-

tended period of time.

Caution:

To prevent a possible short circuit, always unplug the

adapter from the outlet first, then unplug it from the transmitter.

POWERING THE RECEIVER

You can power the receiver using AC power (with the supplied

AC adapter) or a 9-volt alkaline battery (not supplied). For the

longest operation and best performance, we recommend you

use RadioShack alkaline batteries.

43-494.fm Page 7 Thursday, June 3, 1999 9:10 AM