Owner`s manual

Using AC Power

Warning:

Before you connect the adapter, make sure the re-

ceiver's power switch is set to

OFF

1. Insert the supplied AC adapter's barrel plug into the

receiver's

DC9V

jack.

Caution:

You must use a Class 2 power source that

supplies 9 volts DC and delivers at least 100 mA. Its

center tip must be set to positive and its plug must fit

the monitor's

DC9V

jack. The supplied adapter meets these

specifications. Using an adapter that does not meet these spec-

ifications could damage the monitor or the adapter.

2. Plug the adapter's AC plug into a standard AC outlet.

DC9V

43-494.fm Page 8 Thursday, June 3, 1999 9:10 AM