User guide

REMOTE CONTROLS
19
HOW TO IDENTIFY PROGRAMMED CODES
1. Point the remote control away from the digital terminal, TV and VCR.
2. To identify the TV code, press and hold TV and SELECT at the same time until the LED on the remote
control blinks twice.
or
To identify the VCR code, press and hold VCR and SELECT at the same time until the LED on the remote
control blinks twice.
3. Slowly enter the code 9 9 0; the LED should blink once each time you enter a digit. When the three digits have
been entered correctly, the LED blinks twice.
4. Press 1 on the keypad, then count the LED blinks. The number of blinks indicates the first digit in the code.
If the LED doesn’t blink, the digit is 0.
5. Press 2 on the keypad, then count the LED blinks. The number of blinks indicates the second digit in the code.
6. Press 3 on the keypad, then count the LED blinks. The number of blinks indicates the third digit in the code.
HOW TO PROGRAM THE VOLUME CONTROL
This step is not essential, but it lets you better control the volume on your devices. You must have already
completed TV setup as outlined in the How to Search for Codes section of this guide.
1. Point the digital terminal remote control away from the digital terminal, TV and VCR.
2. Press and hold the CBL and SELECT keys at the same time until the LED on the remote control blinks twice.
3. Slowly enter the code 9 9 3; the LED should blink once each time you enter a digit. When the three digits
have been entered correctly, the LED blinks twice.
4. Press TV to control your television volume from the digital terminal remote control, or CBL to control your
digital terminal volume from the digital terminal remote control. The LED blinks twice to confirm a valid
selection.
5. Point the remote toward your equipment and adjust the volume to confirm operation.
Before using the volume control feature for the first time, set the volume to three-quarters using
the TV remote control. Use the digital terminal remote control for all subsequent volume changes.