User guide

REMOTE CONTROLS

HOW TO PROGRAM THE SMARTKEYS™

Your remote control has two SmartKeys™ – CABLE and TV that operate in its cable mode. Each SmartKey™

can be programmed to transmit multiple functions.

Programming and using the CBL SmartKey™

The CBL button normally turns on/off your cable set-top terminal.

To program the CBL button to transmit multiple pre-programmed functions, follow the steps below:

1. Press MODE, then CBL to select the cable mode of your remote control.

2. Press CBL and SETTINGS together until the CBL button illuminates.

3. Press the option number below for the desired functions:

Option Pre-programmed to turn on…

[1] Cable & TV – tune in TV to Ch 3

[2] Cable & TV – tune in TV to Ch 2

[3] Cable & TV – tune in TV to Ch 4

[4] Cable, TV & VIDEO – tune in TV to Ch 3

[5] Cable, TV & VIDEO – tune in TV to Ch 2

[6] Cable, TV & VIDEO – tune in TV to Ch 4

[7] Cable, TV, VIDEO & AUDIO – tune in TV to Ch 3

[8] Cable, TV, VIDEO & AUDIO – tune in TV to Ch 2

[9] Cable, TV, VIDEO & AUDIO – tune in TV to Ch 4

[0] Cable only (default)

4. The CBL button will blink 3 times and go out, storing the selected option.

Programming and using the TV SmartKey™

The TV button normally turns on/off your TV. To program the TV button to transmit multiple pre-programmed

functions, follow the steps below:

1. Press MODE, then CBL to select the cable mode of your remote control.

2. Press TV and SETTINGS together until the TV button illuminates.

3. Press the option number below for the desired functions:

Option Pre-programmed to turn on…

[1] TV – tune in TV to Ch 3

[2] TV – tune in TV to Ch 2

[3] TV – tune in TV to Ch 4

[0] TV only (default)

4. The TV button will blink 3 times and go out, storing the selected option.