Instruction manual
16
SETUP Settings
EZ Scan (Channel Search)
Automatically finds all channels (digital) available through the antenna inputs, and
stores all the active channels in the channel list. Inactive or weak channels may
not appear in the list. In that case, add missing channels manually in the Ch. Edit
menu. The channel list created here can be shown in the Ch. Edit menu.
11
Press MENU to display the on-screen menu.
22
Select the SETUP menu using
33
/
44
then press (SELECT) or
22
.
EZ Scan will be highlighted.
33
Press (SELECT) or
22
.
DTV will be highlighted.
44
Select an antenna input (DTV or CADTV).
DTV is for over the air antenna reception.
CADTV is for cable or wireless cable subscribers.
otes
• If you select CADTV, select a cable band (STD, HRC, or IRC). Ask
your cable service provider about cable band.
• In most cases you can search channels correctly by selecting STD
cable band. Try the other bands if you cannot find any channels.
55
Press (SELECT).
The channel search process begins.
66
When channel scanning is complete, the lowest channel number
found appears on the TV screen.
Ch. Edit (Channel Edit)
This feature allows you to add or erase channels from memory manually and
creates your own surf list, with up to 10 favorite channels. Press SURF on
the remote control when a channel is highlighted.
11
Press MENU to display the on-screen menu.
22
Select the SETUP menu using
33
/
44
then press (SELECT) or
22
.
Ch. Edit will be highlighted.
33
Select the Ch. Edit using
33
/
44
then press (SELECT) or
22
.
Channel Edit menu appears.
To create a custom list:
1. Select a channel to add or erase using
33
/
44
/
11
/
22
on the
channel editing menu.
2. Press (SELECT) to add or erase the channel from the memory
To create a surf list:
1. Select a channel using
33
/
44
/
11
/
22
on the channel editing menu.
2. Press SURF to add the channel to the SURF LIST
ote
• Only the channels in the custom list can be added to the surf list.
44
Press MENU to return to the previous screen or press EXIT on the
remote control to return to TV viewing.
Channel Selection
• Use CH +/– on the remote control or
33
/
44
on the front panel to cycle the
HDTV Receiver through the chan-
nels in memory.
• Use SURF on the remote control to
cycle the HDTV Receiver through
the surf channels in memory.
• Use Number (0-9) and – (dash)
buttons to select a channel directly.