Owner`s manual

REVERSING THE TRANSMIT AND

RECEIVE FREQUENCIES

To swap the input and output frequencies, press

REV

. For exam-

ple, if you have set the transceiver to repeater operation on

146.94 MHz with a positive offset of 600 kHz, the transceiver

would normally receive on 146.94 MHz and transmit on 147.54

MHz. After you press

REV,

the transceiver is set to receive on

147.54 MHz and transmit on 146.94 MHz.

This feature is useful if you want to determine whether you are

close enough to another station to communicate on a simplex fre-

quency. While the other station is transmitting, reverse the fre-

quencies. If you can still hear the other station, you are hearing

their signal directly and you do not need to use the repeater.