Owner`s manual
OWNER’S MANUAL
Searching For Your Code/Searching For Your Code 9
3. Press DEV once.The Device Setup 
programming screen will appear:
4. Press DVD once.The key will animate.
5. Use the Setup Codes For DVD Player/VCR 
Combos (on page 38) to locate the brand name 
and then use the Number Keys to enter the first 
four-digit code for your device. If performed 
correctly, the bottom IR segment will flash 
twice.
NOTE: If the bottom IR segment displayed one 
long flash instead, an error has occurred. Try 
entering the same code again.
6.  Aim the remote control at the device and press 
POWER once.The device should turn off.
7. If the code works, press OK once.The bottom 
IR segmentwill flash twice.
8. (Optional) If you’ve located a setup code that 
works, but it also has a separate VCR code as 
listed on page 38, you’ll also need to program it 
into the remote control to access VCR controls 
as follows:
aPress VCR once.
bUsing the Number Keys, enter the four 
digit VCR code for your DVD Player/VCR 
Combo. If performed correctly, the 
bottom IR segmentwill flash twice.
cPress OK once.The bottom IR segment 
will flash twice.
NOTE: If a separate VCR setup code is not 
listed, you can use the VCR key to program a 
separate VCR device or another device (see 
“Reassigning Device Keys” on page 19).
9. To exit programming, press HOME twice. The 
display will return to the last-selected device 
menu screen.
10. For future reference, write down the working 
DVD Player/VCR Combo code in the following 
boxes:
DVD Player/VCR Code:
Brand Name:______________________
VCR Code (if used):
Brand Name:______________________
SEARCHING FOR YOUR CODE
If your device does not respond to the remote 
control after trying all codes listed for your brand, 
or if your brand is not listed at all, try searching for 
your code.
NOTE: Before performing a code search for a CD or 
DVD player or a VCR, turn on the device and insert 
the required media.
For example, to search for a code for your TV:
1. Press and hold P until the bottom IR segment 
flashes twice. The Program Keys will appear.
RS 6in1 Kam Owners Manual.fm Page 9 Monday, June 7, 2004  12:16 PM










