User manual

13
Operation
If the function switch is set to
OFF
,
recording begins immediately. If
the function switch is set to
VOX IN
,
recording begins and the REC/BATT
indicator lights steadily only when the
recorder picks up sound.
Cautions:
• Do not force down
RECORD
. If you
cannot easily press
RECORD
,
check the microcassette tape’s
erase-protection tabs (see “Pre-
venting Accidental Erasure” on
Page 16).
• To protect the recorder, press
RECORD
only when a microcas-
sette tape is loaded.
Note:
To pause recording, slide the
function switch to
PAUSE
. To resume
operation, slide the function switch to
the previous position.
5. If you set the function switch to
VOX
IN
, adjust
VOL/VOX
to set the sound
level at which recording begins.
6. Press
STOP/EJECT
to stop the tape.
Note:
To record on the other side of the
tape, unload the tape, turn it over, and re-
load it.
14-1045reimage.fm Page 13 Friday, January 12, 2001 3:56 PM