User manual

7
Preparation
an AC or DC adapter and an Adaptaplug

(neither supplied, available at your local
RadioShack store).
Cautions:
You must use a (Class 2 for
AC) power source that sup-
plies 3 volts DC power and
delivers at least 200 mA. The center
tip of the Adaptaplug must be set to
positive, and the plug must properly
fit the recorder’s
DC3V
jack. Using an
AC adapter and plug that do not meet
these specifications could damage
the recorder, the adapter, or the plug.
• Always connect the adapter to the
recorder before you plug it into the
power source, and unplug the
adapter from the power source before
you unplug it from the recorder.
1. If necessary, set the adapter’s volt-
age switch to
3V
.
2. Attach the Adaptaplug to the
adapter’s cord with the tip set to posi-
tive (+).
Caution:
Be sure to set the tip polar-
ity to positive (+). If the polarity is
!
14-1045reimage.fm Page 7 Friday, January 12, 2001 3:56 PM