Owner`s manual

Remote Control

Each time you remove and replace the batteries in

the main unit, you must program the main unit to

recognize the remote control’s signals. If you

change the security code, there is no need to repro-

gram the main unit; it will still recognize the remote

signals. Follow these steps to program the main unit

so you can use your remote control.

1. Set the slide switch to either of the

ARM

set-

tings.

2. Press

PROG

. The sensor alarm beeps once and

its green

PROG

indicator lights.

3. Press

LEARN

. The sensor alarm beeps twice

and its

PROG

indicator flashes slowly.

4. Enter your four-digit security code. The sensor

alarm beeps three times and its

PROG

indicator

flashes quickly.

PROG

PANIC

ARM

CODE

LEARN

PROG

1234

6789

49-329.fm Page 10 Wednesday, August 18, 1999 4:23 PM