Owner`s manual

Checking the Coverage Area

To be sure the sensor detects motion in the areas

you want to protect, follow these steps.

1. If necessary, disarm the sensor alarm (the red

indicator should not be flashing) by entering the

current security code.

2. Confirm that the area is clear of anything that

might trigger the alarm (such as people and

pets).

3. Set the main unit’s slide switch to

CHIME

. A

doorbell-type chime immediately sounds.

4. Walk around in the protected area. When the

sensor alarm detects your motion, the chime

sounds again.

• If the sensor alarm does not chime when you

LOW BATT

PROG

INSTANT

DELAY

ARM

CHIME

49-329.fm Page 15 Wednesday, August 18, 1999 4:23 PM