Owner`s manual

16
are within the coverage area, change the
main unit’s location.
• If the sensor alarm chimes when you are out-
side the coverage area, check the area to
see what is causing the false alarm and
remove the item, or change the main unit’s
location.
MOUNTING THE SENSOR
ALARM
After you determine the best location for your sensor
alarm, follow these steps to mount it on the wall.
1. If necessary, disarm the sensor alarm (the red
indicator should not be flashing) by entering the
current security code.
2. Drill two holes 1
3
/
8
inches (35 mm) apart. Then
thread a screw into each hole, letting the heads
extend about
3
/
16
inch (5 mm).
Note:
The two supplied mounting screws are
suitable for mounting the sensor alarm’s main
unit on a wooden surface. If you are mounting
the main unit on drywall, masonry, or another
type of surface, use the appropriate mounting
hardware (not supplied).
49-329.fm Page 16 Wednesday, August 18, 1999 4:23 PM