Owner`s manual

19
To arm the sensor alarm, press
ARM
on the main
unit or on the remote control. At either the
INSTANT
or
DELAY
settings, you have 10 seconds to leave
the sensor alarm’s coverage area. During this exit
delay, the main unit beeps every second and its red
indicator flashes. At the end of the 10-second delay,
the main unit beeps twice, the indicator flashes
about every 5 seconds, and the sensor alarm is
armed.
If you arm the sensor alarm in the
INSTANT
setting,
when the alarm detects motion in the protected area,
the alarm siren sounds immediately and the indicator
stays on.
If you arm the sensor alarm in the
DELAY
setting,
when the alarm detects motion in the protected ar-
ea, the indicator flashes every second for about 30
seconds, then the alarm siren sounds and the indi-
cator stays on.
PR
OG
PANIC
ARM
CODE
LEARN
PROG
1234
6789
0
5
49-329.fm Page 19 Wednesday, August 18, 1999 4:23 PM