Owner`s manual

12
TROUBLESHOOTING
If you have problems with your motion sensor, try the following suggestions. If you
still have problems, take the sensor to your local RadioShack store for assistance.
Problem Reason Suggestion
Circuit does not function. Poor contact with the
+
/
–
(T5/T6) terminals.
Reconnect the
+
/
–
(T5/T6)
wire firmly.
Indicator does not li
g
ht
when tri
gg
ered.
Poor contact in the
P1 indicator link.
Re-install the P1 indicator
jumper.
Sensor fails to tri
gg
er
main alarm.
TAMPER
’s (T1, T2) or
ALARM
’s
(T3, T4) wire connection is poor.
Check the
TAMPER
and
ALARM
wire connections on
both ends and reconnect, if
necessary.
The P3 jumper mi
g
ht be set for
the wron
g
contact type.
Set it for the appropriate
N.C. or N.O. alarm output.
49-208A.fm Page 12 Wednesday, August 18, 1999 3:15 PM